stupid question i know

K

kenchenzo

New Member
i have an evo iv when its on idle and i rev the engine the boost goes up to 0.5 then drops how should it be when revving at a stand still thanks
 
roynx79

roynx79

New Member
i have an evo iv when its on idle and i rev the engine the boost goes up to 0.5 then drops how should it be when revving at a stand still thanks

your boost gauge should not go above 0.it will sit at about -.5 ish thats what my iv sits at it will move when you blip the throttle
 
Aidy

Aidy

Active Member
i have an evo iv when its on idle and i rev the engine the boost goes up to 0.5 then drops how should it be when revving at a stand still thanks

What does the gauge sit at when it is just idling? And what does it peak at? Could it be possible the gauge just isn't calibrated? Next time you're at a garage (a proper one) they can quickly plumb a gauge in to see how it compares to yours.
 
Simon@NTS

Simon@NTS

Trader
Trader
If you flat it out with ALS @-5* you'd probably see 0.5 bar, try using -35* see what boost you run ;-)
 
T

tweakup

Banned
Mine use to go to 0.5 too when reved on standstill I found it was due to the gauge as I was using a 52mm autogauge. Didn't happen when I changed to a greddy 60mm gauge
 
sponners

sponners

Well-Known Member
You will get a little positive boost when revving in neutral (just ask all the chavs showing off their dump valves in the car park).
 

Nine thousand owners. One garage.

Join free to post in the tech forums, list parts for sale, and get into the members' gallery. Takes a minute.

Create a free account
Top