rolling road day

[ElDopesta]

No it doesn't come with anything else.

You only need a bit of vac hose though, as you can reuse 1 of the pieces from the stock boost control setup.

Will you have a Boost Gauge for monitoring, if anyone has a Dawes Device fitted off you on the day Russ???


El

 

[Cossie1]

Will you have a Boost Gauge for monitoring, if anyone has a Dawes Device fitted off you on the day Russ???


El

Yeh I got a mechanical boost gauge that I can use to set the boost up with.

However I am not sure there will be enough time to fit the dawes devices on the day, as it's not usually a 2 minute job due to intake pipes and dump valves etc having to come off to get at the actuator and j-pipe.

Would be much better and quicker on the day if anyone that is using 1 could get it fitted before hand, just keep off the throttle until the mapping is done (unless you already have a boost gauge fitted, then you can set it to run 0.9bar and it will run pretty much as it does now).

 

[ElDopesta]

ye good call with the idea el. im not sure where i got the pub lunch idea from :blush::blush::blush: has powerstation got a mother and baby changing room ???? :whistling::whistling::whistling:

I will make sure that everyones needs are catered for Geof, hence the wanting to know in advance if kiddies will be attending!

I knew you would be bringing your family as I know how you roll!!!

I just need to know from every one else so The lads at Power Station don't feel alienated!!!!

If there are going to be quite a few kids then I will try to arrange for activities too.....face paint etc.


El

 

[stevolution2010]

I will make sure that everyones needs are catered for Geof, hence the wanting to know in advance if kiddies will be attending!

I knew you would be bringing your family as I know how you roll!!!

I just need to know from every one else so The lads at Power Station don't feel alienated!!!!

If there are going to be quite a few kids then I will try to arrange for activities too.....face paint etc.


El

yay face paint im defo coming now:razz:

 

[ElDopesta]

Yeh I got a mechanical boost gauge that I can use to set the boost up with.

However I am not sure there will be enough time to fit the dawes devices on the day, as it's not usually a 2 minute job due to intake pipes and dump valves etc having to come off to get at the actuator and j-pipe.

Would be much better and quicker on the day if anyone that is using 1 could get it fitted before hand, just keep off the throttle until the mapping is done (unless you already have a boost gauge fitted, then you can set it to run 0.9bar and it will run pretty much as it does now).

If any one does want it fitted on the day then it is no problem buddy as I have roped Raufy and T into attending so they will be at hand and can do all of the fitting leaving you to T off for the Gauge and mapping side of things.

I planned for them to be at hand to offer advice on mods and self servicing as well as general Tech which will leave me free to hang around with Rich/Fuzz!!!


El

 

[ElDopesta]

yay face paint im defo coming now:razz:

Adults will have to do their own!!!


El

 

[Cossie1]

If any one does want it fitted on the day then it is no problem buddy as I have roped Raufy and T into attending so they will be at hand and can do all of the fitting leaving you to T off for the Gauge and mapping side of things.

I planned for them to be at hand to offer advice on mods and self servicing as well as general Tech which will leave me free to hang around with Rich/Fuzz!!!


El

 

[ElDopesta]

El

 

[evogeof]

I will make sure that everyones needs are catered for Geof, hence the wanting to know in advance if kiddies will be attending!

I knew you would be bringing your family as I know how you roll!!!

I just need to know from every one else so The lads at Power Station don't feel alienated!!!!

If there are going to be quite a few kids then I will try to arrange for activities too.....face paint etc.


El

if there are kids coming el ill sort them out ill bring extra wax and cloths :whistling: wax on wax off :razz::razz::razz:

 

[ElDopesta]

if there are kids coming el ill sort them out ill bring extra wax and cloths :whistling: wax on wax off :razz::razz::razz:

I will hold you to that one buddy!!!


El

 

[evogeof]

as title really theres quite a few of us on here that would like to know the power of our cars just wondered if one of the mods i.e el or nick etc could approach a company fairy locally to the majority of us and ask the question

i believe that most companys will do this for groups of cars of 15+ and usually the cost is 35 per car

now it is only a power run but as far as i know they will give u hints and tips as to what needs replacing or adding to increase peformance etc

but worth knowing i think

mite be worth putting your names down here if any ones interested

1.stevolution2010
2.el
3.geof wife and baby ella
4.cossie1
5.michelle
6.mark rs
7.gooner8?
8.clinton
9.b6lee
10.jp night kid
11.
12.
13.
14.
15.

 

[ElDopesta]

1.stevolution2010
2.el & 3 mini El's
3.geof wife and baby ella
4.cossie1 (might not run)
5.michelle
6.mark rs
7.gooner8?
8.clinton
9.b6lee
10.jp night kid
11. Ollie?
12.
13.
14.
15.

El

 

[evogeof]

welcome to the site nick me old fruit cake now you know where to post ya newbie :wub::wub::wub:

 

[stevolution2010]

el are the 3 mini els raufy t and you lmao!

 

[stevolution2010]

If any one does want it fitted on the day then it is no problem buddy as I have roped Raufy and T into attending so they will be at hand and can do all of the fitting leaving you to T off for the Gauge and mapping side of things.

I planned for them to be at hand to offer advice on mods and self servicing as well as general Tech which will leave me free to hang around with Rich/Fuzz!!!


El

so ur shutting up shop then who will do all those engine builds:razz:

 

[ElDopesta]

el are the 3 mini els raufy t and you lmao!

LOL!!!

The 3 mini El's are my kids!!!

so ur shutting up shop then who will do all those engine builds:razz:

I told you before, we usually do our own thing on Saturdays and only put the hours in if members are coming round or there is an emergency job or a Skyline turns up (only if a build is involved on it)!!!


El

 

[RSmark]

Incase anyone dont know their Address:

Northway Trading Est,
Northway Lane,
Tewkesbury,
Glos.
GL20 8JH

Done a route planner for me, 57 mins and just under 45 miles.

 

[Nickygixer-k5]

Ok what,s the date and price for thisIt won't be my car running as my clutch slips on 1.2 bar boost crappy carbon twinplatesBut my mate wants to run his evo so I will be coming up with him if I ain't working if that's ok with you guys

 

[ElDopesta]

Ok what,s the date and price for thisIt won't be my car running as my clutch slips on 1.2 bar boost crappy carbon twinplatesBut my mate wants to run his evo so I will be coming up with him if I ain't working if that's ok with you guys

A provosional booking for you Nick is no problem at all.

It will be a shame not to see your Evo in the flesh but there will be other times I suppose!!!


El

 

[evogeof]

Ok what,s the date and price for thisIt won't be my car running as my clutch slips on 1.2 bar boost crappy carbon twinplatesBut my mate wants to run his evo so I will be coming up with him if I ain't working if that's ok with you guys

6th dec nick, did you get hold of jam then???? anyone else you can think of nick ???