part identification help evo 6

[rx jamie]

just noticed on the back of my inlet plenum, on the v support bracket the bolts to the bottom of inlet plenum and rear of the block...is a little black solenoid type device(kind of like a boost control solenoid) , with two very small hoses going to it. on the solenoid it has what appears to be a little black twisty handle on it for adjusting it for whatever reason. does anyone know what the part is? and if its even needed as i have snapped one of the plastic inlet/outlet pipes off it.

 

[RsvRob]

Sounds like your fuel pressure reg if it has an adjuster on it.

Pic would be handy

 

[B6lee]

if its on the back of the block then it must be the sas valve

 

[RsvRob]

Black twisty adjustable handle !!!!

 

[rx jamie]

Lol sorry lads descriptions terrible. Long day at work yesterday haha

 

[RsvRob]

Part of the SAS system
Get it fixed or blocked off

 

[rx jamie]

Ah right nice one. Sas system is removed anyway

 

[RsvRob]

As long as all pipes are blocked then you wont have any vac leaks

 

[B6lee]

You should just loop a bit of pipe to the 2 ports on that valve. Then just make sure none of the others are left open.

 

[rx jamie]

Cheers for the help lads!