My New 4

B

beano

New Member
Messages
24
Location
Oswestry
Picked my new 4 up yesterday and I love it. It seems to have a good spec list with which to start from. Any advice gladly recieved.......

Spec:
Forged pistons Aria +1mm o/s
Steel Conrods Eagle H beam
Std Crankshaft Micropolished
Cylinder rebore +1mm o/s
Overhaul Cylinder head and reface
Recut all valves and reseat
New modified hydraulic lifters
Steel competition headgasket
Timing belt and balance
17inch evo 5 o.z alloys
evo 6 brembo brakes
3" straight through Fujitsubo Giken Exhaust from turbo back.
hks mushroom filter
hks dump valve
denso tommi makinen fuel pump
Two - way fm lcd alarm system fitted it has remote central locking, remote start up and a remote turbo timer all built in
Std evo 4 recaro interior
Hks boost gauge
 

Attachments

  • DSCN0502.jpg
    DSCN0502.jpg
    159.3 KB · Views: 77
RsvRob

RsvRob

Well-Known Member
Messages
2,882
Location
Beds
Nice. Is that a carbon or just black bonnet? And gimme some figuers... :D
 
Nickygixer-k5

Nickygixer-k5

Well-Known Member
Messages
4,912
Location
South Wales
Very nice looks like it's been looked after even the calipers are nice and bright
 
B

beano

New Member
Messages
24
Location
Oswestry
Hi Rob,

It has had a custom respray on the bonnet, roof and tail, in what I can only describe as a sort of marble effect. the guy who did it has made a fantastic job of the paintwork.

figures wise it is just running 1.2 boost and running about 300, so i'm led to believe, so any advice on where i should go next to get more out of it would be grately recieved i.e upgrade turbo etc etc as I know nothing about these things whatsoever.
 

Attachments

  • DSCN0508.jpg
    DSCN0508.jpg
    127.9 KB · Views: 76
Nickygixer-k5

Nickygixer-k5

Well-Known Member
Messages
4,912
Location
South Wales
I know how they do the marble effect paintwork:whistling: It's wet paint then laid with clingfilm:disgusted: Then lifted to give effect then layered with laquer, just so you know;)
 
RsvRob

RsvRob

Well-Known Member
Messages
2,882
Location
Beds
boost upto 1.3 or even 1.5 if mapped well enough. Get the engine block number to confirm its still the 4 block. If its also a newer block you can push it alot further with the mods your running :D

no other mods except a new walbro fuel pump if its just a tme pump your running
 
Nickygixer-k5

Nickygixer-k5

Well-Known Member
Messages
4,912
Location
South Wales
Was gonna ask is a tommi pump uprated over a standard pump Rob?
 
B

beano

New Member
Messages
24
Location
Oswestry
Ahhh I wondered how they did the paint like that? I haven't got a clue on the fuel pump. Oh and it's got EVO 6 gearbox and diff.

Dont mean to sound stupid but how do i up the boost, is that done via the re-map?
 
RsvRob

RsvRob

Well-Known Member
Messages
2,882
Location
Beds
tme pump should be std, walbro would be an upgrade

up the boost using manual or electronic boost controller or 3port solenoid via the ecu

if your running 1.2bar it has been turned up already as std is 0.8, possibly via an uprated actuator with stiffer spring
 
B

beano

New Member
Messages
24
Location
Oswestry
Cheers Rob,

I need to find someone fairly local that can do the work for me.
 
Top