Dinarte evo9
New Member
- Messages
- 5
Hey guys new to the forum and not really sure if this is the ryt place but here goes I have an Evo 9mr that I'm gonna be doing the following mods on. The tuner says I can expect 650bhp with this setup, wanted your guys take on it. Of sure what boost the tuner is planning on running etc.
All advise would be great.
AMS V-band turbo kit : Precision 58/58 turbo ( kit
includes : tial wastegate, exhaust manifold, 3" downpipe,
12" low profile electric fan, all oil & water lines ) 1 AMS intercooler 1 AMS upper intercooler pipes ( need to move battery to
boot ) 1 AMS lower intercooler pipes 1 Labour : move battery to boot (needed when installing
AMS FMIC) 1 Wiring and fittings for battery in boot 1 Syvecs ECU ( full replacement incl loom adapter ) .
Controls everything from fueling, timing, AVCS to boost.
Also has launch control 1 Aeromotive fuel pump kit 1 Fuel surge tank, Goodridge braided hoses & fittings 1 Weldon external fuel pump 1 Labour : fit surge tank, fuel lines and pump 1 Mapping of ECU 1 800cc injectors ( set of 4 ) 1 HKS fuel rail 1
HKS fuel pressure regulator & Goodridge hoses & fittings 1 HKS oil cooler kit 1 Labour : oil cooler 1 HKS spark plugs 4 Labour : intercooler, boost controller, regulator, injectors, turbo kit, plugs, fuel pump, fuel rail 1 Exedy twin plate clutch kit 1 Labour : fit clutch 1 Redline gearbox oil 4 Redline diff oil 2 HKS Silent Hipower exhaust 1 ARP head studs 1 AMS 2.3 stroker kit ( JE pistons, Manley I-beam rods, Manley crankshaft, AMC Race balance shaft eliminator
kit ) 1 GSC Zero tick lifters 1 HKS head gasket kit 1 Labour : remove & refit engine 1 Oil & filter 1 Consumables 1 Antifreeze 1 HKS timing belt 1 HKS crankshaft pulley belt 1 HKS camshaft (IN) 272, 10.8 1 HKS camshaft (EX),278, 11 1 HKS camgear 2 GSC titanium beehive spring upgrade 1 Labour : fit camshafts & valve springs & cam gears &
rebuild motor 1 Ferrea 1mm intake valves 8 Ferrea 1mm exhaust valves 8 Engineering : fit valves and springs
All advise would be great.
AMS V-band turbo kit : Precision 58/58 turbo ( kit
includes : tial wastegate, exhaust manifold, 3" downpipe,
12" low profile electric fan, all oil & water lines ) 1 AMS intercooler 1 AMS upper intercooler pipes ( need to move battery to
boot ) 1 AMS lower intercooler pipes 1 Labour : move battery to boot (needed when installing
AMS FMIC) 1 Wiring and fittings for battery in boot 1 Syvecs ECU ( full replacement incl loom adapter ) .
Controls everything from fueling, timing, AVCS to boost.
Also has launch control 1 Aeromotive fuel pump kit 1 Fuel surge tank, Goodridge braided hoses & fittings 1 Weldon external fuel pump 1 Labour : fit surge tank, fuel lines and pump 1 Mapping of ECU 1 800cc injectors ( set of 4 ) 1 HKS fuel rail 1
HKS fuel pressure regulator & Goodridge hoses & fittings 1 HKS oil cooler kit 1 Labour : oil cooler 1 HKS spark plugs 4 Labour : intercooler, boost controller, regulator, injectors, turbo kit, plugs, fuel pump, fuel rail 1 Exedy twin plate clutch kit 1 Labour : fit clutch 1 Redline gearbox oil 4 Redline diff oil 2 HKS Silent Hipower exhaust 1 ARP head studs 1 AMS 2.3 stroker kit ( JE pistons, Manley I-beam rods, Manley crankshaft, AMC Race balance shaft eliminator
kit ) 1 GSC Zero tick lifters 1 HKS head gasket kit 1 Labour : remove & refit engine 1 Oil & filter 1 Consumables 1 Antifreeze 1 HKS timing belt 1 HKS crankshaft pulley belt 1 HKS camshaft (IN) 272, 10.8 1 HKS camshaft (EX),278, 11 1 HKS camgear 2 GSC titanium beehive spring upgrade 1 Labour : fit camshafts & valve springs & cam gears &
rebuild motor 1 Ferrea 1mm intake valves 8 Ferrea 1mm exhaust valves 8 Engineering : fit valves and springs
