boost problems? and a rattle in the manafold

C

chrisevo4

New Member
Messages
124
Location
ilkeston
ive just removed a ebc and fitted a man 1 long story why.. but with the man bc fitted its want to run 25 plus psi wont let me lower it .. what am i doin wrong ??:ninja:

allso my evo 4 has a tublur manafold looks like 1 OF THEM £100 EBAY JOBS theres a strange rattle comeing from what sounds like in side of it. checked all bolts as thats what it sounds like when you rev the car up. any ideas ??:mad:
 
B6lee

B6lee

Community Leader
Messages
13,370
Location
Bath
Stick to the ebc mate, they are less fiddly and as for your rattle I would put money on the fact that there is a split in the manifold :)
 
B6lee

B6lee

Community Leader
Messages
13,370
Location
Bath
split ?? do u mean gaskets blowing?

Check gaskets yea and also check the pipes and welds for splits cos this is what normally happens to the cheap manifolds. You'll probably have to take it off to check it properly
 
C

chrisevo4

New Member
Messages
124
Location
ilkeston
would that make it sound tinny and rattley???
like theres a loost nut vibebrateing in side ?
 
B6lee

B6lee

Community Leader
Messages
13,370
Location
Bath
are they easy to remove ??

Yes it would sound like that if there is a small split in it and it's not to bad to remove. If you have checked all the bolts then removal to inspect is the next step. The split may only be tiny so you'll have to look very close.
Have you also checked all 5 bolts that hold the exhaust elbow to the turbo ?
 
sponners

sponners

Well-Known Member
Messages
1,128
Location
Mid Wales
regarding boost

loop a pipe directly to the actuator to see what pressure its operating at.


what actuator is on it?
 
C

chrisevo4

New Member
Messages
124
Location
ilkeston
all sorted now was plumbed in wrong , ive swoped boostcontrooler for a apexi avcr,
manafold is blowing so swapin back to a standed 1,
and ive got a funny noise as well its the aircon pump so i will be removeing that ,

but does any 1 no what size belt i will need once the aircon is removed???
 
B6lee

B6lee

Community Leader
Messages
13,370
Location
Bath
Avcr is a good bit of kit, well done.

As for the mani if it was a cheap eBay one and it cracked then your probably better off with the standard one anyway

Got to your local motorfactors and they will be able to sell you a gates belt which is availible for rs models which don't have aircon so just what you need and if you ask for it in the morning then they should be able to get you one for the afternoon. My local motorfactors did this for me :)
 
Top