Whats needed to get my 6 over the 400bhp mark?

[cherryredbenj11]

As above i need a bit of info on what to get to take my 6 over the 400bhp mark. Car is currently running 363 @ 1.4 bar. Usual bolt on mods, 255 pump, racetech manifold, still on standard turbo, uprated elbow, full 3" system. 3 port solenoid.
Any suggestions as to what i need, cheers.

 

[Steve220]

To make it safe, you'll need a rod job.

 

[evoaps]

And an Evo 9 turbo

 

[evogeof]

[ame=http://www.youtube.com/watch?v=l91ISfcuzDw&list=FLyo54OVVIrCceYN0dJRvsrw&index=17&feature=plpp_video]1 million dollars - YouTube[/ame]

 

[trackday]

Rod job, turbo,8MR cams and injectors

 

[4g638]

As above i need a bit of info on what to get to take my 6 over the 400bhp mark. Car is currently running 363 @ 1.4 bar. Usual bolt on mods, 255 pump, racetech manifold, still on standard turbo, uprated elbow, full 3" system. 3 port solenoid.
Any suggestions as to what i need, cheers.

Depending on the mileage I would not push an evo 6 engine beyond 380hp. So all you can do as it is, is run your evo 6 turbo to 1.6 bar with adjustment to the map to reach 380bhp and leave it there.



After that it becomes a bit expensive, saying that your evo 6 turbo on a set of hks 272s will give you 390+ at 1,75 bar but your engine will be a ticking time bomb.



What you need are :


Evo 9 oem brand new pistons.

K1 rods

80 series turbo

hks 272 cams

remap at 1.9 bar 430/420





Marios

 

[liffy16]

warning you are now entering bottomless money pit zone
please ensure your credit card is empty, wont be for long though! lol !