what is the best suspension setup on a 5/6

[nomuken]

Hi folks,
I'm quite into balance and grip so the quest for a real good suspension setup.
Car will be mainly used on tracks. But should also be driveable on the streets.
Will get some real good coilovers made up with 12/10 or 9/8 kg springs, adjustable top mounts,...
Everything will be polybushed
Right now I'm thinking of only changing the rear sway

What else should be changed? Normal or adjustable droplinks?
What about some excentric rear bushes?

What suspension setup should I start with and then go from there?
Front camber, caster, toe setiings?
Rear camber, caster, toe setiings?

I like my cars on the oversteering side, not the opposite?

 

[B6lee]

I have coilovers fitted and just binned the 6k front and 6k rear springs in favour of 10k front 8k rear. It was fine for getting the perfect ride height and nice for driving round town but when pushing on and on track there was far to much body roll.
Much better now

Lower rear arm bushes on an Evo are eccentric already. You can buy polly bush but no idea why anyone would want to swap to these when eccentric bushes have no movement except from rotating

 

[Mark Shead]

You need to put a budget up, I would run Ohlins with Exe-tc castor adjsutable top mounts, But this is on the high side of 2.5k.

Mark

 

[nomuken]

I will most probably go Bilstein coilovers with custom sprin rates. Got some camber adjustable top mounts too. So my question is more about the rest, swaybars, strutbars, geometry,...