TRS Harnesses

[grant620]

Hi Guys

GB Enterprises Are proud to announce that we are now selling the EXCELLENT range of TRS Harnesses.
For the rest of July we are offering the benchmark Magnum 4 point 75mm (3") Harness in Black, Red or Blue for ONLY £124.00 inc UK delivery

Magnum 4 Point Specification
• FIA approved 8854/98 Saloon Harness
• 4 point snap hook fixings
• 75mm shoulder and lap straps
• Steel adjusters on lap and shoulders
• HANS friendly


The full range is available and starts at only £53.00 for the most basic Harness. Contact us with any specific requirements!
01278651044

 

[supamario666]

Are these still on offer Grant? Cheers James

 

[grant620]

Hi Jamie...
For you, of course

 

[supamario666]

Hi Jamie...
For you, of course

That's what I like to hear Grant! Set in blue please Drop me a PM Mate if you like about the rad as well

 

[EC17PSE]

Can you remove the rear snap hook part to make it work with a harness bar? As i wont need it to bolt into anything.

 

[DDS789]

That's what I like to hear Grant! Set in blue please Drop me a PM Mate if you like about the rad as well

Grant you'll have to charge double for all the extra length of harness for Mario :sneaky:

 

[supamario666]

Grant you'll have to charge double for all the extra length of harness for Mario :sneaky:

How very RUDE!!!

 

[grant620]

Can you remove the rear snap hook part to make it work with a harness bar? As i wont need it to bolt into anything.

Yep - that's what we have done. It just undoes by threading the harness back through the locking clasp and out of the snap hook.

Grant you'll have to charge double for all the extra length of harness for Mario :sneaky:

HAHAHAHAHA!!!!

 

[DDS789]

Can you remove the rear snap hook part to make it work with a harness bar? As i wont need it to bolt into anything.

I would put advise this buddy they aren't designed to take that force in a shunt more to direct force into an appropriate area

 

[EC17PSE]

I would put advise this buddy they aren't designed to take that force in a shunt more to direct force into an appropriate area

whats not designed for the force the harness or the harness bar?

 

[DDS789]

whats not designed for the force the harness or the harness bar?

The bar

It's designed to direct the harnesses to the proper angle going through the seat.

Could all be forum talk, but when I got mine i did plenty of research and ended up mounting mine in the original rear seatbelt holes then through the bar.

It's an each to their own thing really, you'd only find out if something bad happened.

 

[DDS789]

Mine

 

[grant620]

I would put advise this buddy they aren't designed to take that force in a shunt more to direct force into an appropriate area

I'm confused by this...

 

[DDS789]

Bad English and iPad changing my words lol


Harness bars aren't really designed to have the harnesses attached to them, they are designed to direct the harness through the seat properly. And give the correct angle of mounting for the harness (above 45 degrees or something)

I researched it when looking into harness bars and came across a lot of info about attaching harnesses to a harness bar, and the risks of the bar bending, moving etc if a crash occurred.

Hope that makes sense

 

[B6lee]

Bad English and iPad changing my words lol


Harness bars aren't really designed to have the harnesses attached to them, they are designed to direct the harness through the seat properly. And give the correct angle of mounting for the harness (above 45 degrees or something)

I researched it when looking into harness bars and came across a lot of info about attaching harnesses to a harness bar, and the risks of the bar bending, moving etc if a crash occurred.

Hope that makes sense

I've also seen this. Some pretty nasty pictures out there too

 

[EC17PSE]

Thats because there not designed to do the proper Job! It needs a rear support arm to take some of the pulling load, its the same as and sports coupe 2 seater it always goes to a reinforced bar anyway, It will work as my design is not a weak as that

 

[grant620]

Bump