suspension ste up e4 . whiteline rear arb

evo arm's m7960

evo arm's m7960

Well-Known Member
hi
got a new whiteline adjustable rear arb turning up early next week " thanks jamie evo tune " and want to sutup my e4 .

was wondering if any one had any set up tip .

the car already has upper front / lower front h brace + flinch braces up front .

and upper and lower braces in the boot .

running 1deg neg camber all round and +2 rear toe - 2 toe up front .as was told thats what it should be ???

has ohlin springs and adjustabe shocks .

would like a little more turn in and over steer . cheers
 
RsvRob

RsvRob

Well-Known Member
track or rd setup?
how quickly do you want to go throug tyres?

Have my front camber at 2deg neg and it turns nice and quick
 
evo arm's m7960

evo arm's m7960

Well-Known Member
hi .
set up for fast road mate .

i did try the front at 2 neg but your right it killed the tyres :O(

thats why i am trying the rear arb .

cheers
 
evo arm's m7960

evo arm's m7960

Well-Known Member
is the rs rack worth getting hold of ?? or does it make the car twitchy ,,
 
RsvRob

RsvRob

Well-Known Member
rs steering rack is same as a gsr as far as I know so no point
 
evo arm's m7960

evo arm's m7960

Well-Known Member
?? a read some where that it was a better ratio quick rack . might be wrong ?? cheers
 
P

Putty

Member
Paul try sumo power i know Will had his suspension set up there and dont think there to far from you.
 
evo arm's m7960

evo arm's m7960

Well-Known Member
hi buddy i spoke to will when he came over and didnt seam to pleased with what they had done .

there not to far away

i can make the adjustments just want some advise before i do .

the only thing i cant do is corner weight the car .

cheers
 
P

Putty

Member
Ok mate thought the reason he wasnt happy was cause him and ricky changed the subframe and arms and it just wouldnt give them enough adjust ment.

Ant@indigo is very helpfull and they have done work on my car or Andy@FCM is also very helpfull.
 
evo arm's m7960

evo arm's m7960

Well-Known Member
ok cheers buddy i will get the arb on next week a see how it goes :O)
 
evo arm's m7960

evo arm's m7960

Well-Known Member
been advised by antony @ indigo to try.
at 1.5mm rear camber and 1.7 front camber both neg .

so will give that a go with the rear arb in the mid position and see how it goes :O)

as it has now arrived :O)
 
evo arm's m7960

evo arm's m7960

Well-Known Member
would you leave the front and rear toe as they are . rear toe in 2 deg and front toe out 2 deg . cheers paul

As long as that is total toe (1mm each side) then yeah


a big thanks again to antony@indigo-gt for his help :O)
 
J

jamie@evotune

Trader
Trader
Paul try if you have adjustable top mounts try 2.0 deg -ive camber front 1.5 deg -ive camber rear and parallel toe all round if you like the rear to be lively toe it out slightly just 1mm each side that will also help if it understeer's.
 
evo arm's m7960

evo arm's m7960

Well-Known Member
ok cheers jamie never thought to ask you. doh ! " how silly am i "

thanks again mate
 

Nine thousand owners. One garage.

Join free to post in the tech forums, list parts for sale, and get into the members' gallery. Takes a minute.

Create a free account
Top