SRS light

[priceless]

Srs light is on.

Read fault codes: A110 stored, Drivers seatbelt pretensioner currently present TRBL1.

I cut the connector out and soldered the wires together, but light remains on.

Are pretensioners common?

Regards.

 

[Phil74]

Use a 5 amp resistor and it will stay out.

 

[priceless]

Do you mean just get a resistor and wire it in series under the seat mate

 

[Phil74]

yea thats what to do and the SRS light will stay out all the time regardless.

 

[priceless]

Spot on mate. Shall I just pick one up from b&q or maplins?

Would be awesome if it was so simple to fix will save me hassle.

Also can you help me get some 19inch wheel nuts that fit Rota P1s

 

[Phil74]

Maplins or a CET shop if near you mate. Maplins tend to rip the ass out of things with their pricing but is only like £1 anyway. U get the oil done?

 

[priceless]

Oil change with 10 60
Re tapped the thread for the passenger check strap
Tried to fix the srs light by removing plug.
Swapped tyres front to rear to solve scrubbing issue til new tyres arrive
Fixed loose trims as screws were all missing.
Cleaned it twice ha ha.

Need to find some 19mm wheel nuts asap.
Cambelt going on next wknd hopefully.

 

[Phil74]

U cant fix the srs by removing the plug as there must be resistence or it stays lite the same as when you change the steering wheel to after market steering wheel.

I have a set of brand new stainless steel evo wheel nuts if your interested?

Cambelt is a pain in the ass to do when the engine is still in the car. takes like 2-2 1/2 hrs.

 

[priceless]

Will they fit the Rota rims cause I bought some off eBay and they don't even fit in the hole on the rims.
They must be 21 or the collars r too large.

I've only ever done belts with engines in situ I'm hoping it'll be ok lol.
Needs an aux belt too.

What's a cet shop mate. You think halfords or b n q will sell resistors

 

[Phil74]

These are 17mm head domed and i got them with a brand new set of Compomotives i bought but used the light weight nuts i had instead.

 

[Phil74]

Halfords? Dont think so mate. CET do electrical items. Maplins will defo have it. You need a cam lock tool for the evo to change the belt and they are a pain in ass, real pain. Thank god they dont need changing to often lol.

 

[Phil74]

17mm head evo wheel nuts...

 

[priceless]

They likely to fit mate 16 normal and 4 locking I guess?

 

[priceless]

Pm me a price and I'll see if they fit should do as I have 19 domes atm.

Tom

 

[Phil74]

!(mm head leaves it tight to get a socket onto without marking the alloys will pm you now mate.