Spec-R / MADevelopments Intercooler & Results

[Nickygixer-k5]

Nope!!

You sure thats what Pete told me

 

[Jonny IX]

You just need to remove the mesh on the one side of the bumper

NO MODS at all according to Pete mate

Even though it easier, i dont mind the cut look it gives it a race look.

 

[Nickygixer-k5]

NO MODS at all according to Pete mate

Even though it easier, i dont mind the cut look it gives it a race look.

Well he must have changed the design a little then because he told me about 3 months ago that you need to remove the mesh out of one of the trumpets on the front bumper

 

[Mark Shead]

NO MODS at all according to Pete mate

Even though it easier, i dont mind the cut look it gives it a race look.

There is a couple of tweaks needed behind the bumper to brackets and mesh.

Mark

 

[Nickygixer-k5]

See I thought I was going MaD then see what I did Mark

 

[Jonny IX]

Thats confused me then ?

 

[Mark Shead]

Thats confused me then ?

I can post up pict of parts needing to be tweaked but cant do this till tomorrow.

Mark

 

[DazF]

Here we go.

The only mods needed are very minor and do not affect the strength of the bumper.

See pics.

These show a section of the lower centre grill mount cut off. And you benefit from removing the 2 air duck grills due to the size of the clips holding them on.

Regards

Daz

 

[MADrst]

Nick and Johnny, on the bumper you have the two egg shape holes either side of intercooler as you look at, the small bits of mesh inside/behind these has to be removed. Not that you notice this mesh anyway, plus you can see the end tanks now.

 

[Nickygixer-k5]

Nick and Johnny, on the bumper you have the two egg shape holes either side of intercooler as you look at, the small bits of mesh inside/behind these has to be removed. Not that you notice this mesh anyway, plus you can see the end tanks now.

Yes I know that's what Pete told me I know there is no cutting involved unlike the AMS cooler and Petes work is bespoke so I know it would be the best performing and custom fitted for the particular model in question. It is definately on my future mod list. But I had already bought my AMS hardpipes and APS intercooler so it will be a bit down the line unless I can get someone to buy my intercooler and hardpipes that is hint hint anyone:whistling:

 

[MADrst]

Put it up for sale, you know it makes sense! You'll always be thinking that you wish you had bought the best rather than being behind me.

 

[Nickygixer-k5]

Behind you It's you Nick that is playing catch up my friend ask Pete

 

[MADrst]

Ah my bad, I didn't realise you had a Spec-R intercooler and radiator, oh and all the under bonnet parts that we BOTH have!! Lol.

 

[Nickygixer-k5]

Ah my bad, I didn't realise you had a Spec-R intercooler and radiator, oh and all the under bonnet parts that we BOTH have!! Lol.

Busted but have you got all the braided bits plus all the other bits I have on my car Oh and I have an extra gear And I have drove your car but you haven't driven mine Championi Championi

 

[MADrst]

Not into braided! What other bits? Lol. Yes but mine is a MADevelopments car, so be privileged to have sat in it. Oh dear, you have one of those cheap fq's, bless. Plus, and obviously you know this already, that mine is minter than yours and has far less mileage! Me thinks I am the champion now old boy!

 

[Nickygixer-k5]

Not into braided! What other bits? Lol. Yes but mine is a MADevelopments car, so be privileged to have sat in it. Oh dear, you have one of those cheap fq's, bless. Plus, and obviously you know this already, that mine is minter than yours and has far less mileage! Me thinks I am the champion now old boy!

Think you will find it's a gsr And mine is a Indigo GT car oh and mine is a minter as well you bloddy whipper snapper

 

[supamario666]

Nice!