Rocker cover -10AN fittings 1or2

[boothy-]

Hi everyone im taking my rocker cover down to a engineering shop on Monday to get it tapped to fit -10AN fittings, the baffles are getting done as well. Im just wondering I have noticed a lot of people fitting two -10An fittings in the side is it worth having two?,

I will also be keeping the pcv valve on the back of the rocker cover im just going to leave all that side of things oem. Thanks

 

[B6lee]

i have 2 an10 fittings in mine, which i thought was the norm :arms:

 

[evo arm's m7960]

hi i did 2 like lee but if you search the forum for oil catch tank or threads started by me i started a couple of threads on this with some pic,s that may help



.

 

[evo arm's m7960]

here you go buddy :O)


http://www.evoowners.co.uk/f4/oil-catch-tanks-evo-yes-no-10397.html#axzz2RkFBlizs


http://www.evoowners.co.uk/f4/mod-update-e4-oil-catch-tank-11014.html#axzz2RkFBlizs



.

 

[Chris@epp]

I run -AN10 on the rear with no PCV. I have -AN10 on the side, but with a Push Fit Speed flow fitting. Both of these goto a neverneverman oil catch can (which has a breather on it).

As I understand it the side port is an inlet breather, where-as the rear is vent. This allows me to not need the actual larger -AN10 hole on the side. Lots of write-ups and diagrams scattered about the net.

My catch can fills up lovely and had no issues with the set-up.