Re: Ah... FFS

[B6lee]

Right!!! Cars back and all the wiring is now completed.

The fault is coming up as the rear drivers side ABS sensor is not working / faulty!! Just checked the price from Mitsubishi ££££ OMG robbing #unts!!

Any ideas where i can get one of these from??

Thanks

Is the abs light on as well then ??

You can buy second hand hubs from breakers complete with the censor

Failing that I'm not sure really. Try your local motor factors

 

[steveo]

Yes mate,

ABS light was also on.

I've just found one through google and hopefully it should be delivered by Saturday

 

[B6lee]

Yes mate,

ABS light was also on.

I've just found one through google and hopefully it should be delivered by Saturday

Well let us know how you get on. You'll probably have to drill the old censor out cos the rust will probably have eaten into the plastic

 

[RsvRob]

Not sure what price you got but camskill's is £152 new abs sensor or try john @ evobreakers

 

[steveo]

Thanks Guys, will let you know how i get on.

 

[steveo]

Right.... Just finished fitting the replacement ABS sensor and Hub Thanks John @ evo breakers .

Reset fault codes by disconnecting the battery after work had been completed. "Job Done i thought"

The test drive.....

Drove approx. 250yds and then...... Strange loud whirring noise (again:cryfrom the rear and ABS and AYC light came on again!!??:wtf:

What is going on????!!!!

I am just shy of £400.00 light and still i have the same problem!!!!:cry::cry:??!!!

Diagnostic came back with a faulty ABS sensor, i have replaced this now but i am sure it is something else that is causing the noise???!

Any ideas please... Please!:blush:

 

[RsvRob]

What was the actual code that came up? The number not the description you have as this may be wrong....
Either that or the replacement sensor may be faulty..

You may also need to have the codes wiped using evoscan not just by disconnecting the battery.

 

[B6lee]

i had abs fault even after the censor was replaced with a new one but after fiddling with the censor something must have been lined up wrong cos all we did was take it out the hub and put it back in and it cleared the problem and that was last year