Ralliart MudFlaps

[invisible]

These came on my car.

A few things that came on are suspect at best but I just noticed the previous owners yet more shocking DIY!!

Several of them are held on with 3inch wood screws that stick out the other side!!

Did the mudflaps come with fixing?

If not what have people used, i'm thinking some small black nuts and bolts will make them look more tidy.

Any help on what people have used or even where I can get the fixing from would be appreciated

 

[fq-craigus]

Mine have got a metal brace to keep the mudflap straight and the screws to fix to the car are already on the car you shouldn't need and extras mate there is a thread from nicky somewhere and he has posted up pics of the fixings and mounting points

 

[Nickygixer-k5]

Everything you need to know is in this thread http://www.evoowners.co.uk/f4/how-do-i-fit-mud-flaps-3860.html

 

[evoaps]

Everything you need to know is in this thread http://www.evoowners.co.uk/f4/how-do-i-fit-mud-flaps-3860.html

Morning nicky

 

[fq-craigus]

That's the link I was on about lol

 

[invisible]

cheers folks.

I'll check it out and needless to say will probably need to start again!

I'll load some pictures of the current mess when I get a chance lol

Long shot - where can I get some new fixings from (bolts) - I have a feeling these have gone astray!

 

[Ultrafex]

Good luck, hope u get it sorted Pics up once u do

Think I read about your car on TunaMotorsport's web forum, sounds like it'll be a nice motor once u get a few niggles sorted

 

[invisible]

Good luck, hope u get it sorted Pics up once u do

Think I read about your car on TunaMotorsport's web forum, sounds like it'll be a nice motor once u get a few niggles sorted

Yep that's mine!

Still several things to do but all in good time.

They are good guys down there, i'm working through 'em


Looks like my mudflaps do have the brackets just some of the fixing has gone astray and been replaced with long wood screws >.<

 

[chrishfq300]

Everything you need to know is in this thread http://www.evoowners.co.uk/f4/how-do-i-fit-mud-flaps-3860.html

i put big self tapping screw through mine....they are a bit long and stick out the side but the flaps aint going no where

 

[Tudgey]

its never as easy as the instructions say. i had to bend my brackets and use longer bolts.
i can add pics if needed mate?

 

[Nickygixer-k5]

They ain't bolted they are fastened with clips:disgusted: There is only one bolt and that is fitted to the back ones which srews thhrough the arch liner