Newbie saying HELLO from NI

[ElDopesta]

:disgusted::disgusted: less of t......... nicky.............:whistling: welcome to evo owners now you need to get a newbie thread up you know the score

Agreed!!!

Get a Newbie Thread up Jones.

Welcome along, nice to have you with us buddy!!!


El

 

[Ralli///mart]

Did I hear my name mentioned? Thought I should better get down with the kids and all that so here I am :^^:

Oh and hiya to the old faces from the other side

Perfect timing Jones. Now get your own Newbie thread up bud.

Cheers for all the comments guys.

 

[EVOIV MJC]

Hey MJ, See you've been busy posting on here.

I have been on here probably around same time as across the road,,,

Not a bad place here at all,,,,

 

[fq-craigus]

Welcome mate. Nice engine bay mate

 

[foxy lady x]

hiya and welcome, a very sexy bit of kit u have there!!

 

[EVOIV MJC]

hiya and welcome, a very sexy bit of kit u have there!!

wait to you see his engine bay too :whistling::whistling::whistling:

 

[foxy lady x]

wait to you see his engine bay too :whistling::whistling::whistling:

lol :razz::razz::razz:

 

[EVOIV MJC]

having seen it in the flesh (car and engine bay) it is very nice indeed,,

 

[foxy lady x]

there's not a spec of dirt on it in the pics, he must know geof

 

[EVOIV MJC]

there's not a spec of dirt on it in the pics, he must know geof

well we all know how much geooooooooooff loves his feather dusters and bling bling,, But i dont think Marty has a feather duster,, Well not that i have seen him using lol

 

[foxy lady x]

lol that's one heck of a mission using a feather duster lol :shock::shock:

 

[Ralli///mart]

lol that's one heck of a mission using a feather duster lol :shock::shock:

What is MJ like. Cheers for the comments guys.
Not so much a feather duster rather an Elite detailing brush (secured to a length of dowling rod to get into those hard to reach places) and lots of Autosmart G101. Courtesy of MJ as a sample. Cheers pal.
Briliant Premium Polish for the Stainless steel and plenty of elbow grease.
Little bit a time get it into shape.

Like your signature says Foxy Lady. Its an Evo thing.

I save the feather duster just for round the house.

 

[evogeof]

I've got some g101 do you use it under ya bonnet as a degreaser?? Wot do you dilute it to ??

 

[Nickygixer-k5]

I've got some g101 do you use it under ya bonnet as a degreaser?? Wot do you dilute it to ??

5-1 to start off with if that don't take your paint off then 2-1:whistling:


Joking mate start off with 10-1 if that does the trick stick with it if not you can always make it stronger by making it 5-1 Thats 5 parts water to 1 part 101 and not the other way round:blush:

 

[evogeof]

5-1 to start off with if that don't take your paint off then 2-1:whistling:


Joking mate start off with 10-1 if that does the trick stick with it if not you can always make it stronger by making it 5-1 Thats 5 parts water to 1 part 101 and not the other way round:blush:

Is it ok to spray on my bling as I've lots of dirty finger marks on them :whistling:

 

[Nickygixer-k5]

Is it ok to spray on my bling as I've lots of dirty finger marks on them :whistling:

Put it this way I wouldn't:wtf: It'll turn it whiteIt took me 4 days to polish mine back up just use a microfibre and metal polish to remove finger marks

 

[kennye68]

welcome along Marty !!! lovely motor !!!

 

[Ralli///mart]

Cheers for the warm welcome lads and lasses.

Yes, Have to agree with the dilution rates as mentioned. 10-1 for the engine bay is more than strong enough for a clean engine bay. I tend to just spraying it on the non mechanical areas though.

I use another bottle with plain old water in to spray rinse the areas g101 was on after agitation. So I don't go spraying it everywhere in the engine bay. Little bit at a time avoiding all the electrics and so on.

On wheel archs etc... I would go for a 5-1 dilution for a bit more cleaning action to get tough stuff off.

 

[evogeof]

Cheers for the warm welcome lads and lasses.

Yes, Have to agree with the dilution rates as mentioned. 10-1 for the engine bay is more than strong enough for a clean engine bay. I tend to just spraying it on the non mechanical areas though.

I use another bottle with plain old water in to spray rinse the areas g101 was on after agitation. So I don't go spraying it everywhere in the engine bay. Little bit at a time avoiding all the electrics and so on.

On wheel archs etc... I would go for a 5-1 dilution for a bit more cleaning action to get tough stuff off.

Cheers mart o and nick.
I must say it's not like over the road your lucky if ya get 5 replys on a newbie thread there :disgusted:
I'm still waiting for lee5's newbie thread to appear he's not getting away eith that here

 

[1982ollie]

Hi and Welcome - Better late than never.