D
Doodley
New Member
- Messages
- 2
- Location
- Fleet, Hampshire
Hi there,
Just came across you guys on Google. I am on the 'other' forum, but wasn't aware of this one.
I drive an Evo 6 GSR.
Spec:
Engine:
Evo 6 RS engine fitted by Wayne@Arnside Motorsport
Blue flame straight through stainless exhaust
Evo VIII Intercooler recored with a 500hp rated core
KTR alloy hardpipe kit
Blue Silicone Hoses
Ross W 3" turbo intake pipe
Battery relocation to boot kit
ARC Heatshield
Carbon plug cover panel
genuine carbon slam panel (SJS Design Group Buy)
TSL Stainless steel engine boltkit
Cone filter
Hardwired Walbro 255 fuel pump
Ecutek remap on the standard ECU boosting @ 1.6 bar with mild antilag, mapped by Matt @ The Racing Line – Power 375/375
Transmission:
Evo VIII MR rear diff with only 8k miles when fitted (approx 23k ago)
Evo VIII MR 6 speed gearbox with only delivery mileage when fitted (approx 30k ago)
Evo IX clutch & flywheel
Styling:
FQ Peformance Red Ralliart mudflaps
FQ Performance Carbon Fibre vortex generator
Carbon fibre NACA duct
Clear Side Repeaters
Carbon fibre badging at rear
Ralliart Screen Strip
Lancer Register Shop Seat covers front and Rear
Wheels/Tyres:
Rota Grid 18" x 8.5" wheels in white
4 Goodyear Eagle F1 assymetrics
Black steel tuner Nuts
Suspension:
Full Tein Superstreet coilover kit
Fast road 4wd suspension geometry by Wayne @ Arnside Motorsport
Brakes:
Evo 9 Stock Brembos calipers
Project MU SCR Pro 2 piece front disks
New standard rear disks
Project MU HC+ front and rear pads
HEL braided brake lines all round
Motul RBF660 fluid
I have a full Superpro polybush kit waiting to be fitted. I have a problem at the moment, a metallicy 'slapping noise' from the front near side which I will be searching the forum to find some info on. It sounds like a heavy duty ratchet being spun round and is only noticeable above 50mph and gets louder when turning left.
Do you hold any meets? Any of you going to Japfest?
Dudley
Just came across you guys on Google. I am on the 'other' forum, but wasn't aware of this one.
I drive an Evo 6 GSR.
Spec:
Engine:
Evo 6 RS engine fitted by Wayne@Arnside Motorsport
Blue flame straight through stainless exhaust
Evo VIII Intercooler recored with a 500hp rated core
KTR alloy hardpipe kit
Blue Silicone Hoses
Ross W 3" turbo intake pipe
Battery relocation to boot kit
ARC Heatshield
Carbon plug cover panel
genuine carbon slam panel (SJS Design Group Buy)
TSL Stainless steel engine boltkit
Cone filter
Hardwired Walbro 255 fuel pump
Ecutek remap on the standard ECU boosting @ 1.6 bar with mild antilag, mapped by Matt @ The Racing Line – Power 375/375
Transmission:
Evo VIII MR rear diff with only 8k miles when fitted (approx 23k ago)
Evo VIII MR 6 speed gearbox with only delivery mileage when fitted (approx 30k ago)
Evo IX clutch & flywheel
Styling:
FQ Peformance Red Ralliart mudflaps
FQ Performance Carbon Fibre vortex generator
Carbon fibre NACA duct
Clear Side Repeaters
Carbon fibre badging at rear
Ralliart Screen Strip
Lancer Register Shop Seat covers front and Rear
Wheels/Tyres:
Rota Grid 18" x 8.5" wheels in white
4 Goodyear Eagle F1 assymetrics
Black steel tuner Nuts
Suspension:
Full Tein Superstreet coilover kit
Fast road 4wd suspension geometry by Wayne @ Arnside Motorsport
Brakes:
Evo 9 Stock Brembos calipers
Project MU SCR Pro 2 piece front disks
New standard rear disks
Project MU HC+ front and rear pads
HEL braided brake lines all round
Motul RBF660 fluid
I have a full Superpro polybush kit waiting to be fitted. I have a problem at the moment, a metallicy 'slapping noise' from the front near side which I will be searching the forum to find some info on. It sounds like a heavy duty ratchet being spun round and is only noticeable above 50mph and gets louder when turning left.
Do you hold any meets? Any of you going to Japfest?
Dudley
