My VIII GSR Build - Complete Tranformation

ad-p

ad-p

Active Member
Messages
212
Can't believe how much you've done to this car mate from when I saw it last, its looking spot on! Need to see it when it's done :smthumbup
 
Evo8Frankie

Evo8Frankie

Well-Known Member
Messages
2,524
Location
East/North Yorkshire
Can't believe how much you've done to this car mate from when I saw it last, its looking spot on! Need to see it when it's done :smthumbup

:D Cheers Adam, i keep thinking that myself, You seen it when the only thing id done was swap bonnet and boot wasn't it? :razz:
 
Evo8Frankie

Evo8Frankie

Well-Known Member
Messages
2,524
Location
East/North Yorkshire
Last night before i went to bed i thought id have a cheecky go at doing some Carbon wrapping..... proves to be difficult lol.:wtf:

Today has been fooking lovely again,:p so decided to give the old girl a spit and polish, "Dirty Girl" sprug to mind.:whistling::whistling:

After id finished cleaning it, i fitted the Carbon Wrapped bits, a few more blue Samco hoses to the engine bay, and my new D1 Spec Blue Lightweight Wheel Nuts,:D

Oh and then took some pics with my bros goochy camera :disgusted:
 

Attachments

  • P1030737.jpg
    P1030737.jpg
    90.8 KB · Views: 81
  • P1030738.jpg
    P1030738.jpg
    90.9 KB · Views: 81
  • P1030739.jpg
    P1030739.jpg
    83.5 KB · Views: 80
  • P1030736.jpg
    P1030736.jpg
    107.1 KB · Views: 80
  • P1030735.jpg
    P1030735.jpg
    117.2 KB · Views: 80
  • P1030740.jpg
    P1030740.jpg
    84.2 KB · Views: 79
  • P1030741.jpg
    P1030741.jpg
    98.6 KB · Views: 78
  • P1030732.jpg
    P1030732.jpg
    148.3 KB · Views: 78
  • P1030734.jpg
    P1030734.jpg
    92.3 KB · Views: 78
  • P1030733.jpg
    P1030733.jpg
    157.7 KB · Views: 79
  • P1030743.jpg
    P1030743.jpg
    161.1 KB · Views: 78
  • P1030744.jpg
    P1030744.jpg
    175.1 KB · Views: 79
  • P1030745.jpg
    P1030745.jpg
    154.6 KB · Views: 78
  • P1030746.jpg
    P1030746.jpg
    158.9 KB · Views: 78
  • P1030747.jpg
    P1030747.jpg
    150.5 KB · Views: 79
  • P1030748.jpg
    P1030748.jpg
    104.4 KB · Views: 79
  • P1030749.jpg
    P1030749.jpg
    89.4 KB · Views: 80
  • P1030750.jpg
    P1030750.jpg
    170.6 KB · Views: 78
fq-craigus

fq-craigus

Well-Known Member
Messages
8,136
Location
Boston
Looking good pal now get the rest of the dash wrapped too :) I had that textured wrap on mine but swapped it all out for the shiny stuff
 
Evo8Frankie

Evo8Frankie

Well-Known Member
Messages
2,524
Location
East/North Yorkshire
Looking good pal now get the rest of the dash wrapped too :) I had that textured wrap on mine but swapped it all out for the shiny stuff

Yeah iv ran out as i had more than about 2 attempts on the bits iv done lol, i did try the center part with the radio and heater controls but went massively wrong........ is your the proper carbon parts or are they wrapped?
 
fq-craigus

fq-craigus

Well-Known Member
Messages
8,136
Location
Boston
Yeah iv ran out as i had more than about 2 attempts on the bits iv done lol, i did try the center part with the radio and heater controls but went massively wrong........ is your the proper carbon parts or are they wrapped?

Mine are all wrapped mate, I don't have deep enough pockets or can justify to carbon my inside lol
 
Evo8Frankie

Evo8Frankie

Well-Known Member
Messages
2,524
Location
East/North Yorkshire
Mine are all wrapped mate, I don't have deep enough pockets or can justify to carbon my inside lol

I seen your dash at japshow and thought you'd splashed out lol, i may just have them dipped, but will have allsorts done, ie, heater vents, door pulls, window switches, dash inserts, center console and Radio/heater controls console.Hmmmmm
 
ad-p

ad-p

Active Member
Messages
212
I seen your dash at japshow and thought you'd splashed out lol, i may just have them dipped, but will have allsorts done, ie, heater vents, door pulls, window switches, dash inserts, center console and Radio/heater controls console.Hmmmmm

Get some of that 4D stuff mate that's what I used on my dash, it's quite good :)
 
fq-craigus

fq-craigus

Well-Known Member
Messages
8,136
Location
Boston
Yhi used the 4d stuff mate, does look better imo. Na not splashed out haha I wish I could but if I had big monies I would be going more power :)
 
Evo8Frankie

Evo8Frankie

Well-Known Member
Messages
2,524
Location
East/North Yorkshire
Yhi used the 4d stuff mate, does look better imo. Na not splashed out haha I wish I could but if I had big monies I would be going more power :)

Yeah its nice, like i said i thought you had the real stuff. lol Hmmm power or styling hmmmm :whistling::whistling:
 
Dirtmatt

Dirtmatt

Well-Known Member
Messages
2,248
I used 4d wrap on my bonnet and boot, looks better than the 3d stuff plus no dirt sticks in it, only time will tell too see how it lasts lol

Car is looking very nice mate, come a long way with it ;)
 
Evo8Frankie

Evo8Frankie

Well-Known Member
Messages
2,524
Location
East/North Yorkshire
I used 4d wrap on my bonnet and boot, looks better than the 3d stuff plus no dirt sticks in it, only time will tell too see how it lasts lol

Car is looking very nice mate, come a long way with it ;)

Well tbh mate if i go for cabon, think i'll go for the real stuff as something will be on the back of my mind saying its not real lol,

And yeah it has so thanks :D
 
Dirtmatt

Dirtmatt

Well-Known Member
Messages
2,248
Meant for interior, panels are a mission and clearly in my experience not great for the paint lol.

Much left to do?
 
Evo8Frankie

Evo8Frankie

Well-Known Member
Messages
2,524
Location
East/North Yorkshire
just read this!! very nice motor buddy!! as for the interior.......get it flocked :D

Cheers Tommy :)

Well im gonna get my Front/Rear inside pillar covers and headlining done in the same as the Alcantara on my seats and door cards, so it will all be matching as hate the greyish roof lining, marks to easy for my liking. as for the dash ill just get the real carbon inserts. and also want my steering wheel re-trimmed with sued and painted black like the IX :D
 
Top