My Evo 8

[GAZ5EVO]

im not happy with the last alloy so my plan is to get three of them done and on the car as it will be easier to remove 1 wheel rather than more, ill just redo that wheel and some engine bits, im also gonna be doing my boot lid, i wont be doing the fins now as a friend knows a guy who will spray my boot lid cheap ive just got to weld it and prep it then i will have a nice smooth boot lid like jons lol.

 

[Nickygixer-k5]

As Geof said I saw it over the road and looks grat Gaz Keep at it mate. Did you get the link for the bolts

 

[GAZ5EVO]

pro bolts ive already looked at and think ill get them from there, ill check on that thread again in case you put a different link up.

the car is gonna have to wait now till the new year, im putting the alloys on 2moz just so i can put it away in the garage so it dont get damaged etc and it just gives me time to save up and buy all the bits i need so its ready for the shows. hope people like it if they dont then tough lol

 

[Nickygixer-k5]

Why pro bolt Gaz? they are pretty pricey. Just do a search on the bay for stainless hex bolts m8 m10 etc.thats what I did and works out a lot cheaper butty

 

[GAZ5EVO]

just looked at your link and they are cheap was also eying up that heat shield as that is cheap. i think i just need to get cash together and strip the car and get it all done. if i save now by 2013 i should have enough for a full respray, engine tuning and get most bits powder coated and some interior bits as well as new alloys.

there you go plan is sorted lol

what is next on your car nick?

 

[GAZ5EVO]

ive put the wheels back on after spraying them so i can put it away in the garage so i can work on the boot lid here are some pics of it on the wheels and now i can see how much lower she is

im well happy with how she looks

 

[B6lee]

Spot on that !! Reckon a black MR spoiler would finish it off lovely

 

[evogeof]

just looked at your link and they are cheap was also eying up that heat shield as that is cheap. i think i just need to get cash together and strip the car and get it all done. if i save now by 2013 i should have enough for a full respray, engine tuning and get most bits powder coated and some interior bits as well as new alloys.

there you go plan is sorted lol

what is next on your car nick?

Ye come on nick Wots next on our cars I mean your car :whistling::whistling:

 

[GAZ5EVO]

lol geof he is changing to a pink feather duster lol

here is a before and after pics of the car

before

after

like i said the car is in the garage so i can take the boot lid off and weld the spoiler holes and boot lock up as its going smooth, then all i need is e7 red lights and e9 rear bumper. ( its all jontrumans fault )

 

[Nickygixer-k5]

Ye come on nick Wots next on our cars I mean your car :whistling::whistling:

just looked at your link and they are cheap was also eying up that heat shield as that is cheap. i think i just need to get cash together and strip the car and get it all done. if i save now by 2013 i should have enough for a full respray, engine tuning and get most bits powder coated and some interior bits as well as new alloys.

there you go plan is sorted lol

what is next on your car nick?

It's all top secret until the summer gaz as there are some who copy but never equal if you know what I mean:whistling: see above

 

[GAZ5EVO]

lol now, now boys its not about who has the biggest feather duster, its how you share it and compare how well it works lol

glad you like the car looking forward till jan when i can drive her again and BE AT THE SHOW ( dont worry geof ill be there this year dont want you lot crying cause im not there lol)

 

[evogeof]

It's all top secret until the summer gaz as there are some who copy but never equal if you know what I mean:whistling: see above

your cars a credit to you nick you know it inspires me :blush::blush::blush:

 

[evogeof]

lol now, now boys its not about who has the biggest feather duster, its how you share it and compare how well it works lol

glad you like the car looking forward till jan when i can drive her again and BE AT THE SHOW ( dont worry geof ill be there this year dont want you lot crying cause im not there lol)

thats the spirit gaz get polishing :razz::razz::razz:

 

[GAZ5EVO]

i might find out if this guy who is spraying my boot lid can rub down my rear bumper and re-lacquer it then ill be happy with the car.

 

[ElDopesta]

Looking good Gaz!

I should have good news to report back tomorrow buddy as the tests will be concluded by the late afternoon.

I will PM you buddy as soon as I can! :whistling: :whistling: :whistling:


El

 

[GAZ5EVO]

glad you like she look so different now just with those small bits done. ill send you a pm with my mob number just give me a call 2moz any time after 2pm cant wait to test it out.

 

[GAZ5EVO]

i took the alloy off today so 2moz i can rub it down and paint it. im also thinking of changing the colour of the engine bits that are now anthracite to gloss black. Ive just e-mailed spec r about exhaust heat sheild, pas tank and coolant over flow tank read for when the red pipes go on etc. ( once someone finds out a price for me) and will start on the boot lid very soon so its prep'd ready or for the time being get some red vinyl and cover the holes and use sealant to stop water getting in the boot.

 

[cossie]

i took the alloy off today so 2moz i can rub it down and paint it. im also thinking of changing the colour of the engine bits that are now anthracite to gloss black. Ive just e-mailed spec r about exhaust heat sheild, pas tank and coolant over flow tank read for when the red pipes go on etc. ( once someone finds out a price for me) and will start on the boot lid very soon so its prep'd ready or for the time being get some red vinyl and cover the holes and use sealant to stop water getting in the boot.

im sortin it harry dont worry

 

[GAZ5EVO]

i know you are just want to get the parts together then do the whole engine bay in one hit

 

[GAZ5EVO]

LATEST WORK ON THE CAR

here are some pics of my car from the other day and some pics of todays work or distruction lol

this is how my spark plug looked the other day and this is how it is now after i stripped the paint off last night and done some work to it

i decided i wanted it smooth so im gonna fibre glass it and then get it ready for paint, see what ideas i can come up for it.