More air needed , help plz : )

B

bakes fq

Member
Messages
508
Location
Bedfont Middlesex / near heathrow
I'm doin the big weekend at santapod soon and really want to maximise my air intake to my filter on my 9 , I was first thinking bout removeing the headlight when I get there , but after attempting to remove it yesterday at home I relized it's no easy job , does any1 know what other options I have ? Also I see a pic a while back of a guy that had made a nice hole through his light with a hose .. ? Could this be an option ? Cheers
 
Billy MR

Billy MR

Well-Known Member
Messages
2,630
Location
Norwich
Remove the I/c spray bottle ( useless anyway ) and run a pipe up easiest and cheapest way to get some cold air
 
Evo8Frankie

Evo8Frankie

Well-Known Member
Messages
2,524
Location
East/North Yorkshire
Here is a Pic of what i have, but this one is fitted to FQ400Dave's Evo. I spoke to him at Japshow about the conversion and he said its a good little mod. but if you want to do it to a daily drive then id go with just a hole in the Foglight. as this way will let far too much water in as its not sealed,

Im waiting on a spare headlight, then i can have this one fitted for shows ect :D
 

Attachments

  • image.jpg
    image.jpg
    100.2 KB · Views: 55
  • image.jpgjkg.jpg
    image.jpgjkg.jpg
    165.6 KB · Views: 56
EVOIV MJC

EVOIV MJC

Well-Known Member
Messages
2,565
Location
N.IRELAND
if your only doing runs up the strip cant you just take the headlight out for the duration
 
EVOIV MJC

EVOIV MJC

Well-Known Member
Messages
2,565
Location
N.IRELAND
well surely you need to get it out sooner or later if your looking to do the light mod
 
Dirtmatt

Dirtmatt

Well-Known Member
Messages
2,248
I have a 4inch cold air feed where the spray bar reservoir was. Runs from behind the bumper to ring under the filter.. Plenty of air ;) no light mod then
 
Dirtmatt

Dirtmatt

Well-Known Member
Messages
2,248
It's the best option if you ask me. Should feed plenty of air too the filter.

You still using the stock air of Billy

Carbon boot lid don't look bad ;)
 
Top