local tuners

[geo3]

Hey guys hope your weekend has been good, picked up a e4 last weekend now want to check fueling and power can any one suggest a tuner near Hampshire/ wiltshire. Some one that doesn't mind questions and will be honest.
I've heard some good things about m.a developments any one used them??

Cheers guys geo

 

[And@fcm]

We're based in Bristol and work on alot of evo's and can do,
Mapping
Computer wheel alignment
MOT's
Supply and fit various parts
and lots of other stuff

Cheers
Andy

 

[geo3]

Hey Andy, cheers for the reply, where in bristol are you? I'm just looking to get car on the rollers and have a chat about what to do next really, what do you charge for power runs?? What's availability like??

Cheers geo

 

[And@fcm]

here's our website Bristol First Choice Mechanics were you can find the directions and address, we're near Bristol Trade Centre.

We don't have a set of rollers we use a road dyno to estimate the power of the cars we do and you end up with a graph like the one here (http://www.evoowners.co.uk/f34/car-has-been-mapped-again-lol-7191.html#axzz1kE6Q3tFS)

What is done to the car so far? if you wanted to pop by we could do a power run then talk to you about what you could do next

Andy

 

[geo3]

Ok sounds good I'm looking for next couple of weeks, how does the road dyno work so far car has greddy 25g turbo kit with external w/g some sort of ind kit, sports cat may be fitting a normal decat tho, full hks exhaust and apparently a 255 fuel pump will be checking this during the week, at the mo its running 0.7 boost, I would like to think about bigger injectors and ecu then abit more boost, maybe see what you can recommend,

 

[And@fcm]

is it still a standard 4 engine? what ecu is in it, if its still the 4 ecu you can't map these so you'll need one from a 5 or 6. does it have a boost controller? if its still got the 4 injectors then just pick up some standard 5 - 9 ones as they'll be good for 380bhp

Andy

 

[geo3]

Yeah still running standard injectors and ecu, I think ill run it down to yours first just to make sure its running 100% then think about bits from a e5 ect, if I fit these bits from same car will I have to code keys and can I drive to yours safely?? Also is boost adjustable few the mapping? Cheers geo

 

[And@fcm]

you'll keepthe same keys to the car, it'll just be the ecu that changes, if you wanted to fit them I would wait till you arrive at ours before the remap. the boost is adjustable from the ecu but would recommend getting a 3port boost solenoid.

When were you thinking of dropping by?
Cheers
Andy

 

[geo3]

Ok cool, so how much would I be looking at to check the car over in general, just dont want to spend money modding if the cars not running right, also what would you charge for fitting ecu, injectors and mapping, the previous owner fitted a 3 port system but took the controller he said the engine was still all there, does that mean I just need a gizzmo or profec controller? I take it bleed valves won't work? Also Andy what are your opening times??

Many thanks geo

 

[B6lee]

You should be able to run the 3 port off the ecu so no need for boost controller.
Bleed valves are so 1980's

 

[geo3]

1980's :disgusted: I loved mine on my last Nissan! Lol Just checked in the engine bay I've got a little black box with hks which has all the vaccum pipes attached there's a elec cable running from it through bulkhead so will need this checked as don't know what is missing

 

[RsvRob]

http://www.evoowners.co.uk/f10/stage-1-power-upgrades-4-9-a-4466.html

 

[B6lee]

1980's :disgusted: I loved mine on my last Nissan! Lol Just checked in the engine bay I've got a little black box with hks which has all the vaccum pipes attached there's a elec cable running from it through bulkhead so will need this checked as don't know what is missing

yea and i loved my rs turbo but things are alot more controllable now.

id imagine that solenoide was wired to a standalone boost controler as im sure a 3 point one just needs to be pluged in to the ecu via the factory wiring

 

[And@fcm]

we're open from 9 till late most nights

your best dropping use a call and ask for John to sort out a time, saturday would be good though

Andy

 

[geo3]

Cool cheers Andy for all your help ill give you guys a shout towards end of week and hopefully pop in on the 4th, are you def ok to check car over before injectors and map??

Cheers geo

 

[And@fcm]

yeh no probs giving it a run for a log and a check over just give us a call when your ready

andy