knuckles, hubs and driveshafts

[JakeMac]

Can anyone tell me if E4 driveshafts are the same as E5/6/6.5

Also need to know if the knuckles are the same on the E7 and the TME

Doing the clutch on my mak today and some bellend has previously wrecked the threads on the OSF driveshaft and then just wound the hub nut on tight as possible. Also it has seized solid into the hub with no chance of getting it out, tried hammers, bigger hammers, air hammers, used more WD40 than I could shower in and it still hasnt budged. To top it off i then snapped the bolt on the abs sensor. DOH

not a good day

 

[B6lee]

Shafts from Evo 4 are shorter mate so no good. Not sure on other bits, maybe look on camskill see what parts and part numbers are and compare

 

[JakeMac]

Yeah thought as much in regards to the shafts, having said that though I would imagine the outer CV joints are the same so may be able to swap them over. What do you rekon?

 

[B6lee]

im not sure mate. never tried one