Hks GTll 7460R

[Ashy]

Hi there thinking about buying the kit what other supporting mods do i need i have been told uprated roads and cams can u suggest makes and what else would i need ? I need a new clutch also will a standard evo 8 clutch be ok ? Obviously this does depend what power i want too run any help apreciated thanks

 

[Chris@FD]

Rod Job from the likes of engine tuner,APT,Norris etc..
Cams loads to choose from, Kelford,Cosworth,Tomei,HKS, can supply Cosworth/Tomei
Adjustable pulleys I can do some Tomei ones..
You will need to uprate the fuel system..
Exhaust I assume is done already
I can supply the HKS turbo also
Clutch will need to be of the uprated varity standard evo 8 clutch will be 6 speed and not up to the task...

 

[supamario666]

I am going to have this upgrade done to my VI but I would strongly recommend you have your engine fully forged as I have done! If this turbo is fitted/mapped correctly it is the fastest spooling stock frame turbo money can buy and well worth the upgrade. What alot of people do is expect it to make the 500 BHP mark and map the living daylights out of it and push over 2 bar constantly through it!

I know some mention hassles about the warranty so check first with your Tuner about what they will do for you if any issues arise.

Mine will be fitted along side some ID1000 Injectors and will be fitted by CPP Motor Developments.

 

[Ashy]

What type of clutch would u recommend

 

[supamario666]

What type of clutch would u recommend

Mine has just had a new Helix Organic in which will be fine as long as you don't plan on launching it everywhere.

 

[Ashy]

What sort of prices do they go for thanks

 

[supamario666]

What sort of prices do they go for thanks

What's that mate?

 

[Ashy]

How much do they sell for ? And which type can u recommend any where for a good price on one thanks

 

[Ashy]

Clutch kit

This the one

 

[supamario666]

How much do they sell for ? And which type can u recommend any where for a good price on one thanks

TBH mate i use Gaz at CPP now as he alway's come's up with a very good price which is always alot lower than what i can get them for at trade and nothing is to much trouble!

 

[MartinW@EPP]

if you running a hks in the 450/500 bhp power level then it would either be a Twin Plate Exedy at around £1300 or we sell carbonetic single plates for half that price and lots of folk running 550+ with no issues

Carbonetice clutch mitsubishi evo

please feel free to contact me if you need any help on anything, we can supply any part you require really and can also recomend on good tuners for any engine builds or mapping. one thing with the HKS turbo is making sure you have the right cams to make the most of the turbo

martin@evopartsandperformance.co.uk

 

[Dirtmatt]

Carbonetics would be the way too go in my opinion, very well priced. Their single plate is meant to be good for about 500bhp

The hks is meant to be a good turbo, meant to be quick spooling as well.