HELP ENGINE FAULT CODE!!!! PO300 ??? Random/multiple cylinder misfire??
evo arm's m7960
Well-Known Member
- Messages
- 2,223
- Location
- in east sussex on a psvita :O)
what make of car is it ???
found this on the web :O)
Generic OBD Error Code Details for P0300
Random/Multiple Cylinder Misfire Detected
What does this mean?
OBD Code P0300refers to
Basically this means that the the car's computer has detected that not all of the engine's cylinders are firing properly. A P0300 diagnostic code indicates a random or multiple misfire. If the last digit is a number other than zero, it corresponds to the cylinder number that is misfiring. A P0302 code, for example, would tell you cylinder number two is misfiring. Unfortunately, a P0300 doesn't tell you specifically which cylinder(s) is/are mis-firing, nor why.
Symptoms
Possible sumptoms of OBD code P0300
the engine may be harder to start the engine may stumble / stumble, and/or hesitate other symptoms may also be present
Causes
Possible causes of OBD code P0300
A code P0300 may mean that one or more of the following has happened: Faulty spark plugs or wires Faulty coil (pack) Faulty oxygen sensor(s) Faulty fuel injector(s) Burned exhaust valve Faulty catalytic converter(s) Stuck/blocked EGR valve / passages Faulty camshaft position sensor Defective computer
Possible Solutions
If there are no symptoms, the simplest thing to do is to reset the code and see if it comes back. If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors. Random misfires that jump around from one cylinder to another (read: P030x codes) also will set a P0300 code. The underlying cause is often a lean fuel condition, which may be due to a vacuum leak in the intake manifold or unmetered air getting past the airflow sensor, or an EGR valve that is stuck open.
.
found this on the web :O)
Generic OBD Error Code Details for P0300
Random/Multiple Cylinder Misfire Detected
What does this mean?
OBD Code P0300refers to
Basically this means that the the car's computer has detected that not all of the engine's cylinders are firing properly. A P0300 diagnostic code indicates a random or multiple misfire. If the last digit is a number other than zero, it corresponds to the cylinder number that is misfiring. A P0302 code, for example, would tell you cylinder number two is misfiring. Unfortunately, a P0300 doesn't tell you specifically which cylinder(s) is/are mis-firing, nor why.
Symptoms
Possible sumptoms of OBD code P0300
the engine may be harder to start the engine may stumble / stumble, and/or hesitate other symptoms may also be present
Causes
Possible causes of OBD code P0300
A code P0300 may mean that one or more of the following has happened: Faulty spark plugs or wires Faulty coil (pack) Faulty oxygen sensor(s) Faulty fuel injector(s) Burned exhaust valve Faulty catalytic converter(s) Stuck/blocked EGR valve / passages Faulty camshaft position sensor Defective computer
Possible Solutions
If there are no symptoms, the simplest thing to do is to reset the code and see if it comes back. If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors. Random misfires that jump around from one cylinder to another (read: P030x codes) also will set a P0300 code. The underlying cause is often a lean fuel condition, which may be due to a vacuum leak in the intake manifold or unmetered air getting past the airflow sensor, or an EGR valve that is stuck open.
.
evo arm's m7960
Well-Known Member
- Messages
- 2,223
- Location
- in east sussex on a psvita :O)
standard or modded ??
if you google evo 8 PO300 then it seams a common problem on modded evo 8's :O)
its time for some tuners/ mappers imput i think ???
.
if you google evo 8 PO300 then it seams a common problem on modded evo 8's :O)
its time for some tuners/ mappers imput i think ???
.
Simon@NTS
Trader
Trader
- Messages
- 3,887
- Location
- East Yorkshire & Midlands
well for a start have you serviced the plugs?
Simon@NTS
Trader
Trader
- Messages
- 3,887
- Location
- East Yorkshire & Midlands
plugs are a common fault
S
SavageEvo
New Member
- Messages
- 145
- Location
- Essex
Took the plugs out today they looked old and dirty so ordered some new ones and some new leads so hopefully will solve the problem, still no rough idle or any other effects so I cancelled the light jus have to see if it comes back on again I guess lol
Attachments
-
image.jpg