Front bumper mesh

[B6lee]

Only trouble time is tight with pete as having map done by bob rawle on the 25th and also trying to fit some gauges in aswell before then:hm::hm:

try john@evobreakers or antony@indigo-gt for second hand mesh

i ordered new clips for the roof trims from mitsi for my mak and they were there in just a couple days

 

[whodat]

Ok cheers mate might have some phoning to do tommorow as im a bit anal and want to get it right

 

[B6lee]

Ok cheers mate might have some phoning to do tommorow as im a bit anal and want to get it right

yea me too and id hate fot you to spoil the front of your car with some nasty chicken wire !

let us know how you get on

 

[Ozy]

Mr whodat what Evo u got what kind of power figures u looking at? What boost you running? Ate you going for bottom end pulling away power and then going to drive it threw the rev range or?? Let us know got mine booked in next week and just want to know what's the best way to go about it you know how u feel that pull that torque thanks

 

[whodat]

Hi ozy its a 5rs and its circa 480 bhp at 1.8 bar only got it in feb.Done a few bits and pieces on it and wanted it checked on the mapping for piece of mind and also being told on the mot that it was over fueling cheers

 

[invisible]

wrt to the bonnet wire.

Mine has discoulured I guess due to the heat from the manifold.

I am assuming if I use normal satin car paint this will happen again.

Anyone used high temperature paint on this grille or do you think if I spray it up it will hold the heat?

 

[Marty.H]

wrt to the bonnet wire.

Mine has discoulured I guess due to the heat from the manifold.

I am assuming if I use normal satin car paint this will happen again.

Anyone used high temperature paint on this grille or do you think if I spray it up it will hold the heat?

I just used normal Matt hycote car paint and has been fine

 

[B6lee]

wrt to the bonnet wire.

Mine has discoulured I guess due to the heat from the manifold.

I am assuming if I use normal satin car paint this will happen again.

Anyone used high temperature paint on this grille or do you think if I spray it up it will hold the heat?

I used just ordinary satin black paint on my bonnet mesh, and you should see the heat that comes out of mine and I done it back in September and I still looks like new

I don't have the metal slatted panel under it neither, just the wire grills in the bonnet so you can see straight in and let's the heat out quicker too

 

[gooner8]

wrt to the bonnet wire.

Mine has discoulured I guess due to the heat from the manifold.

I am assuming if I use normal satin car paint this will happen again.

Anyone used high temperature paint on this grille or do you think if I spray it up it will hold the heat?

i used Matt black bbq paint on both grills.

 

[invisible]

i used Matt black bbq paint on both grills.

Done any burgers on it yet?

 

[B6lee]

Done any burgers on it yet?

I have only trouble is the fat makes a bit of a mess lol