Evo TD05HR turbo

D

dearing5

New Member
Messages
9
I have just purchased a td05hr 16g 9.8t turbo for a project car (non evo)

couple of things im struggling on,

will the turbo only run one way?

can I put a single scroll housing on it? or run a single manifold with a twin scroll housing?

thanks :D
 
RsvRob

RsvRob

Well-Known Member
Messages
2,882
Location
Beds
Yes only run 1 way because the blades are designed that way.
Keep with the twin scroll its better.
 
D

dearing5

New Member
Messages
9
Ok that's going on ebay then lol.

What evo turbos are good for 300bhp+ and single scroll?
 
Last edited:
RsvRob

RsvRob

Well-Known Member
Messages
2,882
Location
Beds
Non they all twin scroll
Why you want a single
 
D

dearing5

New Member
Messages
9
Really? I seen some evo turbos that only look single? Evo 4s maybe..

I want single because I havent got a twin scroll mani. Plus its npt on an evo so makes it harder.
 
D

dearing5

New Member
Messages
9
Oh are all evo tubs opposite rotation?
 
RsvRob

RsvRob

Well-Known Member
Messages
2,882
Location
Beds
The r designation td05hr meens reverse
 
D

dearing5

New Member
Messages
9
So the normal td05 is normal rotation? Or both ways?
 
RsvRob

RsvRob

Well-Known Member
Messages
2,882
Location
Beds
Evo 1-3 run opposite to 4-9 turbos
No turbo runs both directions...
 
D

dearing5

New Member
Messages
9
So confusing lol.. how do I know what way mine needs to spin? My current cold side is on drivers side
 
D

dearing5

New Member
Messages
9
Cause I thought it would work but my battery is in the way so I will have to keep it oem. I was told you can turn the turbo round but obviously not.. I can just sell it.
 
D

dearing5

New Member
Messages
9
Ahh figured it out with Google pics!! Lol I need a evo3..

What turbos are these?
 
RsvRob

RsvRob

Well-Known Member
Messages
2,882
Location
Beds
Cause I thought it would work but my battery is in the way so I will have to keep it oem. I was told you can turn the turbo round but obviously not.. I can just sell it.

You can't just turn it around because the exhaust to turbo would be different and the actuator prob wouldn't fit between turbo and engine.
If your fitting a td05h you could consider a Scooby turbo as they run the same setup. But you'd need to check the flange type from your exhaust manifold...
 
Top