Evo 9 build (MA Development) 900bhp

[simon999]

Hi guys i thought i would post up my little build which i am having done by mark shead (MA developments) on my evo 9 fq360 very looking forward to it and seeing the out come
first of all i am going to have one of marks 2.2 stroker engines
97mm ARROW CRANK

carrilo H beam rods (Custom size)
CP pistons (Custom size)

M.A.D head
Full linered 4g64 with long rods
balancer del kit
after that i have a very nice multiple throttle body inlet by jenvey to go on

after that we are uprating all the fuel lines and fitting a kinsler reg

then we are going for some ID2000 injectors with custom insight twin intank fuel pumps
and a set of sparktech cdi pro 14b


the turbo kit i will be using is a full race manifold with a efr 9180 with full race downpipe and 2x 44m tial wastegates with twin screamer pipes

spec on car also is
3.8 inch spec r intercooler
custom spec r oil cooler
custom spec r power steering cooler
custom spec r rad
vipec ecu
ohlins dfv coilovers

k sport 8 pot 356mm front
k sport 4 pot 356mm rear
4inch k/n intake

5 speed build gearbox
triple plate exedy clutch
battery in boot
full 3.5 inch custom exhaust
My new number


very looking forward to seein what it will be like when i get her back hoping for 800bhp on v-power and over 900bhp on race fuel + with very very fast spool will update when i can
probs miss out loads but will update when i can hope you like

thanks simon
[/quote]

 

[Nickygixer-k5]

Some nice bits going on there Si, already subscribed to this thread over the road.

How much was your sparktech kit? On my ever increasing of to do list:sad:

 

[mart1983]

wow!

 

[simon999]

Some nice bits going on there Si, already subscribed to this thread over the road.

How much was your sparktech kit? On my ever increasing of to do list:sad:

lol thanks mate is it the pro 14b you want not meny people run this one most run the pro 12 kit which is still good for 1000bhp the 14b is what they use on all out drag cars lol
but i think i payed 1350

 

[simon999]

here a little video of my old engine
which was just a drop in with standard head and inlet
high boost was 612/550
this video is on low boost

http://s554.photobucket.com/user/simonpug206/media/IMG_2096_zpsbbb0f99c.mp4.html

hope you like lol

 

[Nickygixer-k5]

lol thanks mate is it the pro 14b you want not meny people run this one most run the pro 12 kit which is still good for 1000bhp the 14b is what they use on all out drag cars lol
but i think i payed 1350

Yeah I'm going to go for the 14b kit when funds allow, I've been reading up the last few weeks on sparktech website on which way to go, did that price include the coil protectors? Great price if they are included. Got a 2.2 stroker with a Tim Radley stage 2 head and AMS GT35 to go in first:angel:

 

[simon999]

Yeah I'm going to go for the 14b kit when funds allow, I've been reading up the last few weeks on sparktech website on which way to go, did that price include the coil protectors? Great price if they are included. Got a 2.2 stroker with a Tim Radley stage 2 head and AMS GT35 to go in first:angel:

cool mate fair play and no did not come with coil protectors they are like a extra 200 pounds for them
nice mate you will love it i cannot wait to get mine back
what power you hoping for overy 600bhp

 

[Nickygixer-k5]

Hopefully 600ish but as long as it's reliable i'm not bothered if it's a tad below:angel:

I might see what deal I can get direct from sparktech when I'm ready then

 

[simon999]

Hopefully 600ish but as long as it's reliable i'm not bothered if it's a tad below:angel:

I might see what deal I can get direct from sparktech when I'm ready then

Nice mate I am sure it will be I loved my Evo when it was at 612/550 on the efr8374

 

[Nickygixer-k5]

Bet you did, can't wait now to get it on full chat......eventually

 

[martinthegooner]

wow,crazy mate,do you go up Lakeside ever?

 

[simon999]

wow,crazy mate,do you go up Lakeside ever?

sure do mate will be up there again when i get car back next month

 

[simon999]

Not been on in a while to update this thread so here we go
first of all i have sold my old full race manifold and brought the new full race big runner manifold

it is massive but here is some pics before i had it zircotec coated





with zircotec coating






Set of ARP manifold studs




Here is my 4G64 block with nickel-ceramic-plated liners done by capricorn




My custom length Carrillo H beam pro rods




Custom spec r rad with all aeroquip fitting




Custom spec r tanks






FLUIDAMPR HARMONIC CRANK PULLEY




We are about 5 weeks away from finish still a lot of work to do on the block itself then on to getting engine all built up ready to go in car
i have book nortech performance on the 27th on july to make me a full 3.5inch turbo back exhaust system and pair of screamer pipes

 

[martinthegooner]

This thing is going to be mental

 

[gooner8]

Going to drag this or track it? Or just kill every thing it Berkshire lol

 

[Dirtmatt]

Some serious parts there mate