Evo 8 running 2.2 bar

b15risk

b15risk

New Member
Messages
469
Hi guys not sure if this is right but when I boost on ch4 on my boost controller it goes to 2.2bar or so .

I am not really sure if this is ok engine has had a rebuild by trl cheers for help
 
b15risk

b15risk

New Member
Messages
469
Not sure engine I believe has hks 272 cams not sure
 
Steve220

Steve220

New Member
Messages
1,093
Location
Moray, 57N
I think you need to turn the boost down until you've established what your engine spec is.
 
B6lee

B6lee

Community Leader
Messages
13,370
Location
Bath
I think you need to turn the boost down until you've established what your engine spec is.

+1

i dont know of any turbos that will run 2.2bar without destroying itself :shock:


also id be surprised if the fueling etc was set to run at that boost level.

you got a lower pre-set boost level you can use ?
 
b15risk

b15risk

New Member
Messages
469
Yeah it has I been running it low till today really my brothe changed it before we left with out me knowing as I left put me foot down had a nice shock as 4 wheels lit up the engine was built be trl they say it was rolling roaded at 389bhp
 
b15risk

b15risk

New Member
Messages
469
How can I find what turbo is on it as I can't see any marks on it
 
B6lee

B6lee

Community Leader
Messages
13,370
Location
Bath
do not run the 2.2 setting mate. you will melt pistons if its running lean enough.


what did trl do to your engine ?
 
b15risk

b15risk

New Member
Messages
469
Rebuilt the whole engine pervious owner had it done I will look at paper work tomorrow mate
 
B6lee

B6lee

Community Leader
Messages
13,370
Location
Bath
Yea see if you can find what parts were used and we can go from their.

Defo change that boost level down though :)
 
fq-craigus

fq-craigus

Well-Known Member
Messages
8,136
Location
Boston
drop to 1.5 max until further notice mate. might have been rebuilt but doesnt mean its all stong enough inc turbo for that boost level
 
b15risk

b15risk

New Member
Messages
469
had a look at paper work it says engine was forged arp bolts steel hbeam conrods and wiseco pistons does this help also car has a blitz boost controller cheers for help
 
fq-craigus

fq-craigus

Well-Known Member
Messages
8,136
Location
Boston
I would still turn the boost down until you have the map/car checked if its topping out at 120 could be a prob on the map
 
b15risk

b15risk

New Member
Messages
469
i have noticed its got a 5 speed box in it instead of a 6
would that make it top out
 
fq-craigus

fq-craigus

Well-Known Member
Messages
8,136
Location
Boston
No they are Jus geared different top speed should still be there
 
b15risk

b15risk

New Member
Messages
469
turned boost down now running 1.5 bar run it down motorway 110 at 6000 does that look right
 
B6lee

B6lee

Community Leader
Messages
13,370
Location
Bath
turned boost down now running 1.5 bar run it down motorway 110 at 6000 does that look right

I reckon you have an rs box fitted !!

Me and you need to go for a drive to see how cars compare I reckon. Could shed a bit of light on the boost levels then.
 
b15risk

b15risk

New Member
Messages
469
cool would prob help as this is my first evo cheers
 
Top