W
WARDANDRWTBY@AOL.COM
Member
- Messages
- 156
just wondering what sort of price the evo 8 mr cams go for as I might be selling mine soon and not sure what they go for cheers
D
D1andonlyantman
Member
- Messages
- 147
- Location
- Near Cambridge
I was wondering the same thing about my standard IX cams. Are they worth selling or binning?
madhillbilly17
Member
- Messages
- 90
- Location
- under my car
Your mr cams will sale easy,i think i paid around £120 for mine and the guy could have sold at least 3 sets if he had them.
andyw08
Active Member
- Messages
- 454
- Location
- skelmersdale lancashire
I might be interested in them....let me know how much you want, ill speak to the fella that remaps my car see what bhp i could take it to with them, iv got the gsr260 and have hks 272/272 but he said id have to upgrade the springs and retainers if i put them in and dont really want to take off the head off.....so i may have a pair of hks 272's for sale, how much are these worth to people??
madhillbilly17
Member
- Messages
- 90
- Location
- under my car
There is a tool you can use to removal the valve springs without removing the head
andyw08
Active Member
- Messages
- 454
- Location
- skelmersdale lancashire
How does that work then...iv heard of filling the cylinder with air but dont want to try. Is it a mechanical tool and where would i find it......thanks for that, really want the hks in like, im hoping for 400bhp
madhillbilly17
Member
- Messages
- 90
- Location
- under my car
I've not had the need to use one but seen a few different types about,this would be the one i would try if i needed to http://www.ebay.co.uk/itm/Valve-Spr...092?pt=LH_DefaultDomain_3&hash=item233cf311ac
i was thinking to stop the valve dropping through you could either hold the top of the valve with a scope magnet or put the piston to dtc,your not going to be putting any pressure on the valve,pressure will be just on the spring so it should just stop it dropping to far down,which i doubt they would anyway,to take valves out they needed a little push,mite as well change the valve stem oil seals at the same time,i bought uprated vitons as they were at a good price, £28 in our country but i was buy some other bits in the states so added them as they were only £10 in the states.
i was thinking to stop the valve dropping through you could either hold the top of the valve with a scope magnet or put the piston to dtc,your not going to be putting any pressure on the valve,pressure will be just on the spring so it should just stop it dropping to far down,which i doubt they would anyway,to take valves out they needed a little push,mite as well change the valve stem oil seals at the same time,i bought uprated vitons as they were at a good price, £28 in our country but i was buy some other bits in the states so added them as they were only £10 in the states.