evo 7 ecu onto a 5 whats need

[johnboywood]

as above whats needed or need to be swapped for one to fit and is it immobilised?

 

[Marty.H]

Connect Cable 20 to pin 32 Rad Fan Hi to condensor fan Hi
Connect Cable 21 to pin 34 Rad fan lo to condensor fan lo
swap pins 32 and 34 condensor fan Hi/lo Evo 6 only
disconnect pin 91 only if auto ICS is needed
Note Condensor fan lo on Evo 4 is controlled by the AC ECU not the engine ECU
Use Rom 90550001 Jdm Ralliart rom for evo 7 ecu's
Use Rom 96260009 rom for evo 8 260 ecu's
change ECU perephiry to 16D0 for no rear 02 sensor, Immobiliser or no front 02 Heater Circuit
change ECU perephiry 8A89 to 8D89 to disable EGR fault code

 

[sponners]

swop pins 8 and 22 if car wont start