evo 6 vent to a 4 + some DIY

[IYAAYAS]

Fitted my evo 6 bumper vent to my 4 today. So heres a few pics. Also made another bit to sit behind the front wheel and the door, not sure what these are called or if I even like it. Its not finnished yet but give me your opinions and what they are actually for.

Now heres the wing extension things, It will be made from 3mm aluminium and reduced to 10mm opening at the front and a 20mm opening at the rear. This one is made from card and is a bit twisted. The real one will be straight.

Ali

 

[RSmark]

front bit looks ok, but leave the other bit off.

 

[EVOIV MJC]

WHY!!:cry:

 

[gooner8]

im with mark, really like the one's on the front bumper but think they need to be white. Imo don't like the 2nd one's on the door. Imo

 

[fazzhead24]

could the front one be designed to guid more air inside the arch for better cooling to breaks, back one not sure!

 

[IYAAYAS]

could the front one be designed to guid more air inside the arch for better cooling to breaks, back one not sure!

The front takes air to the cooler behind it by letting more air in throught the front vent escape through the vent.

The one behind the wheel is to keep it straight and true at speeds I think

Ali

 

[m7gsr]

front bit looks ok, but leave the other bit off.

+1

Front one will look better in white

 

[evoaps]

front bit looks ok, but leave the other bit off.

+1