Evo 6 hesitating ?

[dan87]

When I floor it in second or 3rd it's hesitating as the rpm rises it just not smooth at a point it hesitates ? Any reason for this it done it a few times before now it done it all 3 times I just tried booting it :/

 

[Simon@NTS]

Change the plugs and set to 0.55

 

[dan87]

Yea just gone into dyno tech for service so getting all new plugs belt etc sorry what 0.55 ?

 

[Simon@NTS]

is the mm gap

 

[Aidy]

You might be able to get away with just having the plugs regapped, they might not need changed at all. Gapping them only takes any competent garage a few minutes so shouldn't cost much.

 

[dan87]

It's in dyno tech atm he should do it if he is changing plugs shouldn't he ? Don't you just buy plugs for that car or do they all have to be adjusted

 

[Aidy]

It's in dyno tech atm he should do it if he is changing plugs shouldn't he ? Don't you just buy plugs for that car or do they all have to be adjusted

They should be checked and adjusted before fitting....but there is obviously nothing stopping a slapdash company just putting them in right out of the box. Asking if they've gapped them first might offend so I'd ask something like "what did you gap them to?"

 

[dan87]

Is that best to say that if I just say about the hesitation someone told me to gap the plugs he might say yea I did this, will company's get offended if I say have you gapped the plugs ?

 

[dan87]

What's the gap supposed to be on all evo 6 0.55

 

[Aidy]

What's the gap supposed to be on all evo 6 0.55

Depends on the level of tune, but 0.55 is what most are gapped to.