Evo 6 boost pipe diagram

[Osborne0121]

Actuator , inlet etc boost pipe diagram I'm re doing mine as the cars
Boost is not happening thing it's been plumbed wrong

Thanks

 

[RsvRob]

Just plumb actuator directly to turbo and you should see 0.7 bar

 

[Osborne0121]

Just plumb actuator directly to turbo and you should see 0.7 bar

What about the inlet one and the one that comes from the right by the bulkhead

 

[evo4project]

Just plumb actuator directly to turbo and you should see 0.7 bar

this is exactly what' I've done. As the connector in my engine harness is missing. Will suffice until you run a boost controller.

 

[RsvRob]

Block the inlet off

The pipe running to the bulkhead will connect to the std solenoid

 

[McFall1984]

im looking a guide also to plumb in my boost controller
but i have an external wastegate

 

[Osborne0121]

So tried a few ways today still struggling to pull the skin
Of a custard I'm thinking the actuator is up te duff

 

[RsvRob]

Try blowing through it?
Is it the std one with or without the hat?
What boost are you getting?

 

[Osborne0121]

Try blowing through it?
Is it the std one with or without the hat?
What boost are you getting?

Feels like I'm not getting any I've got loads of waste gate chatter so feels like the no kick when the turbos ment to kick in

It looks standard and never changed from when it came in

 

[mart1983]

dont know if this will help...

 

[Osborne0121]

dont know if this will help...

That's how I've got it now cheers for that

 

[ptaroni]

is this how a standard boost solenoid should be plumbed in? my evo 4 just has a pipe from the turbo housing to the standard boost solenoid back to the wastegate .. theres no tpiece like this is showing. thanks