Evo 4 no gears

[Osborne0121]

Feels like into going into gear and sounds like it is but
When u release the clutch no drive not even a bite a cars whisper or nats
Bollock if a movement ?

 

[RsvRob]

Clutch knackered

 

[Osborne0121]

I've got mixed reviews some say box others say clutch ?

 

[Simon@NTS]

It will need investigating by a local specialist imo, to lose all gears so suddenly sounds a bit more terminal

 

[captain slow]

Does the gear stick actually move in to the selected gear direction and stay there,in neutral does it looks like it's sitting where it should,does it grind

 

[Osborne0121]

Does the gear stick actually move in to the selected gear direction and stay there,in neutral does it looks like it's sitting where it should,does it grind

It's sits like it should do you hear the gear box go into that gear
Just when lifting the clutch it's as if there is no clutch at all

 

[captain slow]

Sounds like it's jammed on,no grinding then.

 

[Osborne0121]

Sounds like it's jammed on,no grinding then.

Nothing quiet as a mouse

 

[mart1983]

Nothing quiet as a mouse

quiet as a mouse! is the car turn on? it is running.. lol


only joking m8! :razz::razz::razz::razz:

 

[Osborne0121]

Cars running perfect I tried with engine on and off it gos into gear without depressing clutch
Also so I'm thinking clutch ****ed

 

[captain slow]

if I had those symtems on any car I'd be checking clutch cable,cylinders or clutch it's self. If the gearbox feels right when engine is on or off with no grinding I very much doubt it's anything else. Hope this helps pal

 

[Osborne0121]

if I had those symtems on any car I'd be checking clutch cable,cylinders or clutch it's self. If the gearbox feels right when engine is on or off with no grinding I very much doubt it's anything else. Hope this helps pal

Yes cables ok and fluid so ill take the box off and go from there

Thanks for the advice any how

 

[Tan]

Check the link on top of the gear box (from under the bonnet) I had the same problem and it turned out to be the link cradle broke

 

[Glenn H]

I had the same problem! i've changed a few clutches now in on the Evo's but this time no gears. After 3 times the box coming out and me looking at it and speaking to a few specialists they said it was strange after checking all the basic stuff and not finding the fault. So anyway i decided to fit a new paddle clutch and it made no difference till the clutch fork arm snapped and looking at It, It had stress points and must have been flexing hence why i couldn't engage gears.

Any way all fixed now and driving. That was one random fault that i have never seen.

Hope you get it fixed.

 

[Osborne0121]

I had the same problem! i've changed a few clutches now in on the Evo's but this time no gears. After 3 times the box coming out and me looking at it and speaking to a few specialists they said it was strange after checking all the basic stuff and not finding the fault. So anyway i decided to fit a new paddle clutch and it made no difference till the clutch fork arm snapped and looking at It, It had stress points and must have been flexing hence why i couldn't engage gears.

Any way all fixed now and driving. That was one random fault that i have never seen.

Hope you get it fixed.

Cheers mate I'm gonna get the box off this Sunday got any tips for me ?

Thanks

 

[Simon@NTS]

Practice releasing the release bearing!

 

[micevo]

Check the link on top of the gear box (from under the bonnet) I had the same problem and it turned out to be the link cradle broke

id also look at this first as the rubber perishes and you cant select gears easy fix just weld up.....

 

[Glenn H]

I followed this first time as i didnt have it on auto data. EVO Performance Parts | EvoMoto.com...
Clutch & Flywheel Install. There is no denying that the stock Evo clutches are weak. Replacing them with ...

 

[Glenn H]

Practice releasing the release bearing!

What fun that is for the first time, and so many people just try pulling the box off without doing it.

 

[B6lee]

Check the link on top of the gear box (from under the bonnet) I had the same problem and it turned out to be the link cradle broke

I'd also be looking at this !
The bracket that holds the cables to the box has rubber bushes and are prone to braking off. Just weld them up