evo 4 boost adjustment

S

.stevo.

New Member
Messages
11
hi all. i was given a manual boost valve that goes inline on the actuator pipe. are these any good to lift my boost or are they no good for evo's. if not whats the best way to do this easy mod. thanks. my guage shows its at 0.8bar would like to raise it to at least 1.0bar. ?
 
sponners

sponners

Well-Known Member
Messages
1,128
Location
Mid Wales
ball and spring type valve is fine, dont turn the boost up to much without getting it checked.
 
ElDopesta

ElDopesta

Well-Known Member
Messages
5,705
Location
Nuneaton
I do not recommend using manual ones but at the end of the day it is up to you. They are known to be unreliable at times, some times they run just fine too.

I have to agree with Sponners, you should get it checked out at time of fitting by some one with an accurate boost gauge as not all gauges read correctly.

El
 
MR.LANCER

MR.LANCER

New Member
Messages
328
Location
Birmingham
i would say they are rubbish mate.
high chance of them messing up.
if so, go for the electronic one which shows you an internal display.
looks the bit aswell!
 
ElDopesta

ElDopesta

Well-Known Member
Messages
5,705
Location
Nuneaton
You failed your MOT and have an advisory

Oi Mr Lancer,
We do not say rubbish if the person already has the item, if he/she does already have the item then we say that it is not recommended!!!!

There are many turbo cars running on the bleed valves that have no issues. Granted, the majority of them are branded ones (that may have been professionally installed) and not the "R" or "Super" type ones that ebayers have listed like the plague which R the ones to avoid like the plague as they are prone to over boosting the turbo which makes the engine go POP!!!!

You will need to get trained up a little buddy, I think you need to add my suggestion to your ADVISORY LIST!!!:D

El
 
S

.stevo.

New Member
Messages
11
so wats the way forward with lifting my boost, as most people are running 1.0/1.2 bar.
 
ElDopesta

ElDopesta

Well-Known Member
Messages
5,705
Location
Nuneaton
The most safest way is to have an electronic boost controller, there are many different ones available on the market. It all boils down to your budget.

El
 
S

.stevo.

New Member
Messages
11
so how much am i looking at and were would i get one
 
MR.LANCER

MR.LANCER

New Member
Messages
328
Location
Birmingham
lol
well im just being honest.
it was given to him aswell'
like i mentioned, the electronic are the best & they safe.

advisory taken & point noted
cheers el'
 
ElDopesta

ElDopesta

Well-Known Member
Messages
5,705
Location
Nuneaton
No worries Mr Lancer!!!
.Stevo.,

You are looking to spend anything from around £100 upwards and they will add value to your car when it comes to resale.

El
 
S

.stevo.

New Member
Messages
11
cheers mate. any sugs were the best place to perchace one from.
 
ElDopesta

ElDopesta

Well-Known Member
Messages
5,705
Location
Nuneaton
Why, from John Boy of course!!!!

I will PM you in a little while buddy.

El
 
sponners

sponners

Well-Known Member
Messages
1,128
Location
Mid Wales
I've found the dawes type valves very reliable (well......there isn't exactly a lot to go wrong with them)

as el said have found bleed valves to fluctuate boost levels a bit, but as long as you have a gauge to monitor things then you'll be fine.
 
quakes

quakes

New Member
Messages
328
Location
wolverhampton
i would also change your actuator if u wanting 2 up your boost e8 are the 1's to go 4
 
Top