ECU Question

M

Marty.H

Member
Messages
527
Location
Norwich
Right so will have to go shopping for a 5 ECU and i take it that will be a black plastic case on that
 
RsvRob

RsvRob

Well-Known Member
Messages
2,882
Location
Beds
Yes mate black plastic case preferable with a 7202 chip. But the tme ecu with 7203 chip will still be ok just more work for the mapper ;)
 
M

Marty.H

Member
Messages
527
Location
Norwich
Yes mate black plastic case preferable with a 7202 chip. But the tme ecu with 7203 chip will still be ok just more work for the mapper ;)


Thats spooky was just looking at a tme ecu. Sorry for all the questions but its the only way you learn but how will i know what chip is fitted ?
 
RsvRob

RsvRob

Well-Known Member
Messages
2,882
Location
Beds
Can remove the board from the case and it will say on the chip itself ....

Ask as many questions as you like we're here to help, only way I learnt aswell lol
 
M

Marty.H

Member
Messages
527
Location
Norwich
Was now looking on ebay at a tme ECU and that is prices at £395 or there is an Apexi power FC for £200 now when i had the apexi power FC on my Pulsar GTi-R i was not overly happy with it to be honest do they work any better on the evo
 
RsvRob

RsvRob

Well-Known Member
Messages
2,882
Location
Beds
stick with a std 5/6 ecu they are more than capable and plug and play
 
M

Marty.H

Member
Messages
527
Location
Norwich
Sounds ideal to me at least the cold start and that will be better then i use to have on the apexi on my pulsar is £395 for a tme ecu about right
 
S

stevieITR

Trader
Trader
Messages
256
was just wondering do you need the evo V injectors or are they the same as the IV?
 
M

Marty.H

Member
Messages
527
Location
Norwich
Yes i think i do need them as well and when i unpluged ECU earlier it now stops when i stop so will have to do idle learn again tomorrow :sad: i had to do that when i got it as battery was flat and it would not idle then its simple enough to do thankfully
 
B6lee

B6lee

Community Leader
Messages
13,370
Location
Bath
Yes i think i do need them as well and when i unpluged ECU earlier it now stops when i stop so will have to do idle learn again tomorrow :sad: i had to do that when i got it as battery was flat and it would not idle then its simple enough to do thankfully
yea i had that issue after i had my VII mapped, doesnt take long for it to get back to normal though :)
 
M

Marty.H

Member
Messages
527
Location
Norwich
I have never come across any other car that has to learn the idle like an evo and have been a mechanic for many years a strange one that
 
B

boroboy

New Member
Messages
42
Location
middlesbrough
£395 for a tme ecu is bit expensive shop around you will find one cheaper

a standard 5/6 ecu normally sell about £100-150
 
HermaN

HermaN

Member
Messages
307
Location
Aberdeenshire
Get an Evo 5/6 ECU and some 560cc injectors (Evo 4 are 510cc),then just a direct swap of your old ECU & injectors with the new. As said, remember to wire up pin 79 so the ECU can be flashed.

Oh, and you MIGHT experience battery draining/charging problems with the Evo 5/6 ECU, if you do then cut the wire to pin 33, that fixes the issue.
 
Top