car not holding boost?

gooner8

gooner8

Well-Known Member
Messages
2,244
Location
berkshire
gaped to 0.6 m. As some said 0.7 and some 0.55. The size's my tool had was 0.51 or 0.61 or 0.7 so went for the middle one? :)
 
gooner8

gooner8

Well-Known Member
Messages
2,244
Location
berkshire
boost turned back up and it seem's ok. A little bit once or twice at the end of 4th but a lot better. Tho it is only 12c temp tonight so that maybe helping? As i just think the temp may have some thing to do with this :)
 
Last edited:
RsvRob

RsvRob

Well-Known Member
Messages
2,882
Location
Beds
Then get some more tools for the tool box :)

0.55 gap ....
 
And@fcm

And@fcm

Trader
Trader
Messages
1,075
Location
Bristol
are you running 3ports? or external boost controllers as the standard ecu should do temperature control also,

when was the last time the plugs were changed?
 
gooner8

gooner8

Well-Known Member
Messages
2,244
Location
berkshire
hi and, my plug's were done @ 70 k now reading 84 k .i thought the good one were fit and forget? Yes got a dawes type r spec boost controller. No 3 port!? :)
 
And@fcm

And@fcm

Trader
Trader
Messages
1,075
Location
Bristol
the iridiums are about £40ish a set and most change every year to two years or you can use the copper ones £10 a set (i use these in mine) and change twice a year

Andy
 
gooner8

gooner8

Well-Known Member
Messages
2,244
Location
berkshire
cool thanks and, will grab mine tomor any prob's i'll pop in Friday and grab some of the cheaper one's are they Bpr or br's? :)
 
gooner8

gooner8

Well-Known Member
Messages
2,244
Location
berkshire
right not good news? Re gapped to 0.5 and its much worst!? Misfireing under boost so bad it just Misfire's!
 
gooner8

gooner8

Well-Known Member
Messages
2,244
Location
berkshire
the iridiums are about £40ish a set and most change every year to two years or you can use the copper ones £10 a set (i use these in mine) and change twice a year

Andy

where abouts are you and? Thanks
 
And@fcm

And@fcm

Trader
Trader
Messages
1,075
Location
Bristol
these are our details
Unit 1 Netham Ind Park/Netham Rd Bristol BS5 9PJ
0117 941 3232
have you checked you coil packs?

Andy
 
gooner8

gooner8

Well-Known Member
Messages
2,244
Location
berkshire
these are our details
Unit 1 Netham Ind Park/Netham Rd Bristol BS5 9PJ
0117 941 3232
have you checked you coil packs?

Andy

thanks and no haven't, how do i do that? Take the plugs out swap over and check for spark's? Cheers :)
 
Top