Cank and bearings help please??

[Evo539]

Mains. 56.989 56.990 56.982 56.982 56.978

Little end (rods) 44.978. 44.962. 44.976 44.978

Is my crank ok and what bearing sizes will i need, on the crank it looks like yellow/brown/orangey colour lol.

 

[evo arm's m7960]

hi this should help

down load and have a read :O)

try evo 6 engine section 11-64 to 69

Mitsubishi Workshop Manuals

http://www.evoscan.com/manuals/Evo6/Workshop Manual/EV6_XE11.pdf
.

 

[Evo539]

hi this should help

down load and have a read :O)

try evo 6 engine section 11-64 to 69

Mitsubishi Workshop Manuals

http://www.evoscan.com/manuals/Evo6/Workshop Manual/EV6_XE11.pdf
.

Cheers mate ill ava look!! I feel like i should be a scientist to rebuild this blady engine

 

[evo arm's m7960]

there not to bad:O)

just remember mitsubishi uses micro tolerances on its bearings and the aftermarket / race bearings tend to have 1 size that covers 3 micros sizes .

if your unsure get some pro help :O)

good luck


.