boost

[leo]

hi all you fellers with evos non of you can make up your minds as wot is safe boost on evo 4 with mods some of you will say 320 bhp some say 330 some say no more than 350. 1.2 boost some say 1.4
OK WOT IS THE RIGHT SETTINGS AND WHO DO YOU TRUST TO DO IT:wtf: COME ON I AM WAITING FEEL FREE AND TALK AMONG YOUR SELVES AND GET BACK TO ME LOL HE HE LOL

 

[stevolution2010]

doesnt matter what u run eventually it will walk haha

 

[jamie@evotune]

Ask the person who is mapping it as they should be able to advise you.

 

[B6lee]

Yes, good call Jamie :razz:

And if they don't know then then they shouldn't be mapping your car

 

[chrisevo4]

ive got a e4 mods are

up ratedfuel pump
hks induction kit
hks system
decat
up rated down pipe
evo6 injectors
evo 6 ecu .. mapped with larnch control
apexi avcr running 1.5 bar in evey gear.... lol
up rated clutch and flywheel.

i can say my car runs spot on never miss s a beat and feels well fast . hope this helps mate. 1.5 bar the only way to go ....pmsl
l

 

[mark.]

sounds good chris what bhp is it kicking out mate

 

[chrisevo4]

dont no mate not had it on the rollers yet .
any 1 with a stock evo 4 your more than welcome to come have a go lol.
my mate builds evos ,
wayne at wk autos.. his car is evo 6 rs2 bare shell rebuilt will be running soon est 650 bhp ...any 1 in the east midds he no s his shit lol

 

[mark.]

i'm in grimsby, cleethorpes area chris ive got the evo 6 tommy mak

 

[chrisevo4]

cool mate any mods ?? most of my mates have evosmy mate has a fq340 his is stock and i can pull away from him .... lol is that near hull??

 

[mark.]

yes mate half hour away, in process of getting mods now just can't make up my mind
apexi avcr boost controller
welbro 255 fuel pump
cusco excedy organic clutch with lightened fly wheel
hks 4 inch intake spf-r / rs induction kit
stainless manifold
blitz nur spec r exhaust and decat
dump valve
going to do tappets too as ive got a lazy one sometimes and it does me head in when it starts to tap
also going to do a cam belt change
when all thats done going to get a remap done dont know were yet
and all this is gonna cost a fortune and leave me skint lol

 

[mark.]

sorry for crashing your thread leo

 

[sponners]

its because there is no definitive answer as to what power will be safe, some will break at standard horsepower some will make another 100bhp

how much do you want to push it?

 

[leo]

its alright i put threads like thaty in so i get to see wot other people think and not just a few it comes quite good most of the time and i lerne as i go along never bin english classys yet lol and no probs keep crashing as long as most of it is about the original thread who cares thank you all for input:whistling:

 

[leo]

how long has it run on this power out put cus i have not finished mine yet but will be very simeler to thos mods you have done

 

[chrisevo4]

--------------------------------------------------------------------------------

yes mate half hour away, in process of getting mods now just can't make up my mind
apexi avcr boost controller
welbro 255 fuel pump
cusco excedy organic clutch with lightened fly wheel
hks 4 inch intake spf-r / rs induction kit
stainless manifold
blitz nur spec r exhaust and decat
dump valve
going to do tappets too as ive got a lazy one sometimes and it does me head in when it starts to tap
also going to do a cam belt change
when all thats done going to get a remap done dont know were yet
and all this is gonna cost a fortune and leave me skint lol





..get the apexi avcr .. its a must .and get cossie of here to map it mate he did mine for £150 and added larnch control..yerr

 

[mark.]

cheers chris, will do mate, ive seen a second hand apexi avcr boost controller for 300 pound from japan though

 

[chrisevo4]

i got a black one from my mate was haveing his silver 1 but woundnt work on mine so tryed his black 1 that did hes gutted...lol
think el of here has got 1 for sale mate put a ad in wanted better than getting it from japan.

 

[mark.]

nice one hope he still has it

 

[chrisevo4]

what manfold u got ?? if it s 1 of ebay mate bin it my mate put 1 of them tublar 1s os ebay on and had it rollingroaded and lost 15 bhp....crap.was 1 on my car when i got it so i put a stock 1 back on car feels like it pulls better..

 

[mark.]

seen one on a web site got slight crack in the weld just wants a bit ov ally weld job done its up for 175 mate what do u reckon chris