Bonnet

[WARDANDRWTBY@AOL.COM]

I have had my bonnet sprayed and after it was sprayed it came back with these indents they wasn't in the bonnet before he had it they are all in a row along the top of the bonnet just below the washer jets so I took it back to the sprayer and he took it down to bare metal and re sprayed it but the indents are still their and he's told me it's the glue that glues the under frame to the bonnet and said that the glue has shrunk and it's caused the indents could this be right cheers

 

[WARDANDRWTBY@AOL.COM]

Anybody had any similar problems cheers

 

[Billy MR]

Without seeing it, could be a reaction with the paint...

 

[madhillbilly17]

like said above abit hard to say without seeing it,but if its indented why didn't he check it in prep and stopper it before priming the second time round.

 

[aaronevo5]

He could be right with the shrinking it could be shrinking when he bakes the panel. But rightly said he should have layerd something on top of it to stop it happening second time round. Third time lucky ay