Wingnut247
Active Member
More progress pics
B6lee
Community Leader
You finished early then.
Wingnut247
Active Member
Few more bits ready to refit!
Nickygixer-k5
Well-Known Member
Don't know how to tell you this Chris but it looks like some sort of radioactive substance is gathering under your anti rollbar
Wingnut247
Active Member
More refitting today! Can see the light at the end of the tunnel now!
Wingnut247
Active Member
Wingnut247
Active Member
Bit of an update! Car all back together and test driven!
Unfortunately the usual evo gremlins struck as per sods law, first up the abs light stayed on! Traced to a failed plug on nsr speed sensor, removed plug and hard wired. Problem solved!
Next up after bleeding ayc pump with plenty of new fluid, 2 mile test drive light comes on! Read code, dreaded 82 (pump fail) grrrrrrrrrr!
So just order a nice new rebuild kit and bleedbox off of dan oldham! (cheers Dan)
So will post up some rebuild pics of ayc pump once kit arrives!
Unfortunately the usual evo gremlins struck as per sods law, first up the abs light stayed on! Traced to a failed plug on nsr speed sensor, removed plug and hard wired. Problem solved!
Next up after bleeding ayc pump with plenty of new fluid, 2 mile test drive light comes on! Read code, dreaded 82 (pump fail) grrrrrrrrrr!
So just order a nice new rebuild kit and bleedbox off of dan oldham! (cheers Dan)
So will post up some rebuild pics of ayc pump once kit arrives!
Nickygixer-k5
Well-Known Member
Your not having much luck hey, I would keep it off the road for good and just preserve it:whistling:
Wingnut247
Active Member
Lol! No its just testing my comittment i reckon! Going to give it some abuse as punisment once i fixed it!
Yours finished yet? Liking all these polished bits your having!
Nickygixer-k5
Well-Known Member
erm nope, it's like waiting for christmas, in fact I would think christmas 2014 would be sooner:meh:
Wingnut247
Active Member
Rear wheel alignment today! 
Couple of pics of the finished product underneath while on the ramp!
And sum on first trip out!
Couple of pics of the finished product underneath while on the ramp!
And sum on first trip out!
Billy MR
Well-Known Member
Them wheels and that stance makes me want one
Wingnut247
Active Member
Nickygixer-k5
Well-Known Member
If you didn't take it all apart you wouldn't have had to have it realigned; )
Wingnut247
Active Member
AYC pump overhauled this evening and all back up and working again!
Got a very good quality and comprehensive rebuild kit and a bleed control box thx to Dan oldham (svengali)
member on here! Will add link to him at bottom for anyone looking to do a rebuild!
Highly recommended! Bleed control box makes bleeding an absolute doddle!
Link to AYC repair kit
http://www.evoowners.co.uk/showthread.php?p=141850#post141850
Got a very good quality and comprehensive rebuild kit and a bleed control box thx to Dan oldham (svengali)
member on here! Will add link to him at bottom for anyone looking to do a rebuild!
Highly recommended! Bleed control box makes bleeding an absolute doddle!
Link to AYC repair kit
http://www.evoowners.co.uk/showthread.php?p=141850#post141850
Last edited:
B6lee
Community Leader
Good kit indeed !!
You happy now mate
You happy now mate
Wingnut247
Active Member
Wingnut247
Active Member
First 3k done on the forged motor this week so decided it was time for service interval!
Also had weeping oil cooler pipe so had local hydraulics place remanufacture the oil cooler hoses for me!
Also had weeping oil cooler pipe so had local hydraulics place remanufacture the oil cooler hoses for me!
Wingnut247
Active Member
Decided a while ago i wanted some carbon rapping done on the car, finally got round to having it done yesterday!
Be thanks to lee for doing a top job and putting up with me hanging about and generally getting in his way! Lol! Heres some pics of work in progress!
Heres the bit I did myself as was flat and dead easy!
Took car up workshop for a good wash and took some pics of finished reasults of rapping with a clean car!
Got a Blitz Nur Spec R 3" cat back last week too
Thx to B6lee for the cusco 3 point strut brace and carbon fibre effect bonnet dampers too!
Oh and also thx to lee for window vents! Lol
Be thanks to lee for doing a top job and putting up with me hanging about and generally getting in his way! Lol! Heres some pics of work in progress
! Heres the bit I did myself as was flat and dead easy!
Took car up workshop for a good wash and took some pics of finished reasults of rapping with a clean car!
Got a Blitz Nur Spec R 3" cat back last week too
Thx to B6lee for the cusco 3 point strut brace and carbon fibre effect bonnet dampers too!
Oh and also thx to lee for window vents! Lol
B6lee
Community Leader
No problem mate, looks good now :razz: this wrapping is easy :razz:
Nine thousand owners. One garage.
Join free to post in the tech forums, list parts for sale, and get into the members' gallery. Takes a minute.