M
MartinW@EPP
Trader
Trader
- Messages
- 391
- Location
- north east
A very special turbo kit based on AMS footprint: This is the kit used to win the MLR 30-130 with a time of 6.9 seconds. its been on x2 very well know cars which have both been very well looked after, the last owner doing less than 4000 miles since it was purchased
720 BHP capable with better spool than GT35 due to HTA wheel.
The Kit contains:
AMS Header (lightly ported and polished internally) Coated with Zircotec black ceramic coating
FP GT35HTA Never done more than 2.2 bar or seen more than 700* EGT (full working order)
Polished compressor cover
Ported PT0.63 turbine housing (Zircotec Ceramic coated)
AMS Recirc O2 Housing (Zircotec Ceramic coated)
4" Inlet pipe and K&N Filter (New)
All Goodridge PTFE Oil and water lines
Black wraped AMS Down pipe
Tial 38mm waste gate 1.2bar springs
Alloy J-Pipe
Assembled using high quality fasteners inc Ti Bolts.
Ready to bolt on to your car.
Bargain at £1950
Should you order this kit from AMS directly cost would be c. £5000 inc VAT & Shipping
http://www.amsperformance.com/cart/A...mance.com.html The cost of Zircotec ceramic coating would also be c.£600 if you wanted all of the components done. Zircotec high performance coatings, ceramic coatings, engine, automotive, motorsport, exhaust manifold and header coatings.
[/QUOTE]
720 BHP capable with better spool than GT35 due to HTA wheel.
The Kit contains:
AMS Header (lightly ported and polished internally) Coated with Zircotec black ceramic coating
FP GT35HTA Never done more than 2.2 bar or seen more than 700* EGT (full working order)
Polished compressor cover
Ported PT0.63 turbine housing (Zircotec Ceramic coated)
AMS Recirc O2 Housing (Zircotec Ceramic coated)
4" Inlet pipe and K&N Filter (New)
All Goodridge PTFE Oil and water lines
Black wraped AMS Down pipe
Tial 38mm waste gate 1.2bar springs
Alloy J-Pipe
Assembled using high quality fasteners inc Ti Bolts.
Ready to bolt on to your car.
Bargain at £1950
Should you order this kit from AMS directly cost would be c. £5000 inc VAT & Shipping
http://www.amsperformance.com/cart/A...mance.com.html The cost of Zircotec ceramic coating would also be c.£600 if you wanted all of the components done. Zircotec high performance coatings, ceramic coatings, engine, automotive, motorsport, exhaust manifold and header coatings.
