acd ayc bleeding with evoscan help please

[gary stanfield]

Hi all can anyone help .
I've had no problems with my acd ayc
I decided to change all my oils all ok
connect evoscan to bleed and followed all I could on the Web . and seemed to go ok . ive gone through 3 L of sp3 and no air . anyway since doing it I have all 3 lights on after 100 yards or so . any one know what to do

 

[andyw08]

What exactly are you doing? Iv got the bleed box off svengali on here and its pretty straight forward, he gives you instructions with it. How quick was the fluid coming out of the bleed nipples? Mine was slowly dripping out at first.....it turned out the pump wasnt making pressure so had to buy a new pump

 

[gary stanfield]

What exactly are you doing? Iv got the bleed box off svengali on here and its pretty straight forward, he gives you instructions with it. How quick was the fluid coming out of the bleed nipples? Mine was slowly dripping out at first.....it turned out the pump wasnt making pressure so had to buy a new pump

the fluid was gushing out of all nips with no air . using evoscan .. the pump if find è as there is lots of presume and is only 1 year old . must still be some air somewere. I'll try again once I get some more sp3 lol

 

[andyw08]

3L of fluid is quite a lot....think i used just over 1L....theres a couple of sensors that could have gone faulty. You can make it flash a code on the dash and will tell you why the light is on but i dont know how, maybe someone can shed some light

 

[gary stanfield]

3L of fluid is quite a lot....think i used just over 1L....theres a couple of sensors that could have gone faulty. You can make it flash a code on the dash and will tell you why the light is on but i dont know how, maybe someone can shed some light

no acd or ayc faults on evoscan ? not to worry ill get there in the end lol