How do i up the boost on my E4

[tom01793]

Hay guys my evo should be running 1.2 bar, but it was turned down to 1 bar because of miss fire problems but now i have had a full service and gaped plugs for higher boost, as far as i know i think you have to turn a nut or some thing i think, how and were is this, I think i have found it is this right

 

[RsvRob]

Erm a good suggestion would be to get whoever turned it down, to reset it back to 1.2bar

 

[carsevo99]

Boost

Sure I can see a bleed valve in pic have a look at actuator pipe work

 

[B6lee]

Erm a good suggestion would be to get whoever turned it down, to reset it back to 1.2bar

without a doubt !! :shock:

 

[roynx79]

i would ditch thew bleed valve fella not the best things in the world mine kept spiking try getting a electronic boost controller i hear gizzmo's are pretty good

 

[EVOIV MJC]

i have the gizzmo ms ibc pretty easy to set up and use,,

 

[carsevo99]

Boost

If you had the standard pipe work you could remove the grommets in the boost solenoid that will get you 1.2 bar until you get a electronic boost control even a cheap one avers are silly money these days and take a lot to set up but great once you understand them

 

[roynx79]

i have the gizzmo ms ibc pretty easy to set up and use,,

i control mine via an apexi power fc :razz:

 

[RsvRob]

A Good quality manual bleed valve is fine and won't spike. The cheap ebay jobs are useless lol.

If you don't kow what your looking at to up the boost then I wouldn't be touching it.....

 

[Simon@NTS]

I'm not a fan of bleed valves as every one I have seen have had boost creep, I'd be getting a nice EBC