Engine oil

mark

mark

New Member
I usually get my oil done for me but apparently he been using shite oil so I'm going to do it myself so which is the best engine oil to use cheers
 
Simon@NTS

Simon@NTS

Trader
Trader
i used to use 5-30 fully synthetic castrol edge, opinions will vary
 
fq-craigus

fq-craigus

Well-Known Member
5-30 fully synth castrol gtx magnatex top stuff imo. A lot use Titan race or fuches
 
mark

mark

New Member
Yeah want to use the top stuff as cause the guy who normally does the oil change uses shit stuff after starting the engine it taps so turn the engine off and on again it's ok sometimes when I take it in the country for a good spin one ov the tappets start tapping too so need some good oil should sort the tapping problem out hopefully or I'll have to replace the tappets
 
fq-craigus

fq-craigus

Well-Known Member
Yh use some good stuff and it breaks down any crap in the oil nicely. Also using the good stuff lubes the components when not running as it sticks better. Update the tappets if you haven't already get some 3mm ones I say
 
fq-craigus

fq-craigus

Well-Known Member
Standard tappets are about 1.5 mm. For 100 notes 3mm ones I got mine from indigo-gt
 
GG205rob

GG205rob

Active Member
Mine are smaller than 1.5mm. Probably less than 1mm, seems slightly random as to what size they fitted to what?
 
B6lee

B6lee

Community Leader
Fuchs Titan race 10/50 as used by most Evo owners :):)
 
mark

mark

New Member
Anyone on here sell the oil and what do u reckon on the tappet subject lee me old chap :)
 
invisible

invisible

New Member
Anyone on here sell the oil and what do u reckon on the tappet subject lee me old chap :)

opie oils mate. They were offering a discount earlier in the month.

Search the trade posts here wont be too far back and follow the link or send em a PM and see if they can do you a deal if not already on it for evoowners members
 
Steveyb_evo3

Steveyb_evo3

New Member
I use 5-40 shell helix on a forged engine I get great oil pressure hot and cold
 
mark

mark

New Member
opie oils mate. They were offering a discount earlier in the month.

Search the trade posts here wont be too far back and follow the link or send em a PM and see if they can do you a deal if not already on it for evoowners members

Will do cheers dude
 
O

oilman

Trader
Trader
Hi

I would say a good 5w-40 would probably be the way to go, unless you are getting high (over 125C) oil temps, burning loads of oil or rattly, then a 10w-50 is the best choice.

5w-40 engine oil | 5w40 oil
10w-50 car engine oil | 10w50 oil

Out of those, the best ones are the Fuchs/Silkolene Pro S, Millers CFS, Motul 300V, Redline and Gulf Competition.

Cheers

Tim
 

Nine thousand owners. One garage.

Join free to post in the tech forums, list parts for sale, and get into the members' gallery. Takes a minute.

Create a free account
Top