wheel alignment setting

[doylerevo]

hi guy and girls

im looking for alignment setting for my evo 7 which has 18" alloys on it,
so think setting should b different to standard 17"... :thinking::thinking: my steering is out the window at the min
any help i would be greatful [

 

[Marty.H]

Stock wheel size settings are

Front camber: 2 degrees -ve
Front toe: 0 degrees 8 minutes total toe out. 0 degrees 4 minutes per wheel toe out.
Front castor: Whatever the stock, non adjustable set up can give me.

Rear camber: 1 degree -ve
Rear toe: 0.00 degrees total or parallel.

 

[doylerevo]

Stock wheel size settings are

Front camber: 2 degrees -ve
Front toe: 0 degrees 8 minutes total toe out. 0 degrees 4 minutes per wheel toe out.
Front castor: Whatever the stock, non adjustable set up can give me.

Rear camber: 1 degree -ve
Rear toe: 0.00 degrees total or parallel.

Thanks
so should this be the same for 18" as well.

 

[Marty.H]

Cant see 1" making much difference even though some say it will

 

[evoaps]

Cant see 1" making much difference even though some say it will

would it not also depend on the tyre wall height as 18s with low profile tyres could be smaller diameter than 17s with normal tyres?

 

[doylerevo]

would it not also depend on the tyre wall height as 18s with low profile tyres could be smaller diameter than 17s with normal tyres?

I'm runnin 235/40/18 and stock is 235/45/17 . . So will stock settin
g b ok

 

[And@fcm]

i'd say it depends on what you want to use the car for, if its mainly road then you could do
camber toe
front 1.5 0
rear 1 1


track
camber toe
front 2 1
rear 1.5 1

 

[Will Seng]

i'd say it depends on what you want to use the car for, if its mainly road then you could do
camber toe
front 1.5 0
rear 1 1


track
camber toe
front 2 1
rear 1.5 1

Hi sir, may i know the caster needed to be adjust? Road use most of the time.