need a tiny bit of help

[mark]

this is the second time i have wrote this out, the first time it didnt post and it took 20mins to write gutted
right here we go again
i fit my hks rs induction kit today and i was a pipe short as the pipe from my standard air filter box didnt fit, i also want to fit me dump valve but i think i need a t piece (is this correct) ive took some pictures ill try put them on but not promising lol this may take a while :whistling::whistling::whistling:

 

[cossie]

Get the pics up mate I don't think you need a t piece but think you will need a bung for one of the pipes

 

[evogeof]

Get the pics up mate I don't think you need a t piece but think you will need a bung for one of the pipes. tell you wot ill give you one of my butt plugs ive got lodas of them. yes you have guessed im a

:disgusted::disgusted::disgusted::disgusted:

 

[mark]

:disgusted::disgusted::disgusted::disgusted:

pmsl ive got a bung thankyou geof your bungs will be a bit big for wat i need :whistling::whistling::whistling:

 

[mark]

tried getting pictures up they start to up load then a problem occurs
anyway the pipe needs to go from the hks there is a piece sticking out of it for a pipe to go on its about 1 inch in diameter and it goes towards the back of the engine connecting to another bigger pipe
hope this helps

 

[ElDopesta]

tried getting pictures up they start to up load then a problem occurs
anyway the pipe needs to go from the hks there is a piece sticking out of it for a pipe to go on its about 1 inch in diameter and it goes towards the back of the engine connecting to another bigger pipe
hope this helps

That is the pipe that you need to connect your dump valve to buddy.


El

 

[mark]

That is the pipe that you need to connect your dump valve to buddy.


El

ill c if i can get a t piece from somewhere in grimsby then mate

 

[ElDopesta]

Why do you need a T Piece buddy???

What you need to do is utilise your existing hose which the Recirculating Dump Valve was connected to.

The other option would be to use a blocker and bung it up (this would also be the case if you decided that you want to fit an Atmospheric Dump Valve).

Using a blocker on one or both ends will depend on which Dump Valve you have or on if you decide to you don't really want one.

PM me your email address and I will send you a pic over tomorrow at around lunch time of what the end result should look like so you know exactly what to do!


El

 

[mark]

Why do you need a T Piece buddy???

What you need to do is utilise your existing hose which the Recirculating Dump Valve was connected to.

The other option would be to use a blocker and bung it up (this would also be the case if you decided that you want to fit an Atmospheric Dump Valve).

PM me your email address and I will send you a pic over tomorrow at around lunch time of what the end result should look like so you know exactly what to do!


El

nice one el
email address removed, use PM to stay safe Nick

 

[mark]

this is the second time i have wrote this out, the first time it didnt post and it took 20mins to write gutted
right here we go again
i fit my hks rs induction kit today and i was a pipe short as the pipe from my standard air filter box didnt fit, i also want to fit me dump valve but i think i need a t piece (is this correct) ive took some pictures ill try put them on but not promising lol this may take a while :whistling::whistling::whistling:

right try this

 

[mark]

yippeeee picture is up shiney pipe on left and mucky black rubber pipe lower right do i need a pipe to go across there

 

[mark]

yippeeee picture is up shiney pipe on left and mucky black rubber pipe lower right do i need a pipe to go across there

some more pics :whistling::whistling:

 

[mark]

some more pics :whistling::whistling:

getting the nack of this now lol

 

[RsvRob]

Needs blanking of if your runing a VTA bov or pipe attaching to a recirc valve

 

[mark]

not sure wat it is so ill put a picture up now am getting the nack of it lol 2 mins

 

[mark]

not sure wat it is so ill put a picture up now am getting the nack of it lol 2 mins

here goes another pic

 

[RsvRob]

Forge or r-spec copy...

VTA bov mate. You get the pssshhhh noise on lift off?

Block the hole on the new hard pipe mate. Bit of 35mm hose and a plug. The bov attaches to the upper hard pipe. All sorted then...

 

[RSmark]

that DV need to go into the rear pipe, hard bit i can see in the 1st pic. then the small vaccum hose fits on the top of the DV. Then you need a blanking plug to fit where the stand Valve used to be.

 

[RSmark]

as Rob posted, both the same replies.

 

[RsvRob]

Possibly need an overall shot of the engine bay.... just to confirm what pipe is where