what are your avcr settings

[gary stanfield]

Hi all lost all my settings on my avcr can anyone help . I have a evo 8 fq330 with gsc s2 cams 3 bar fpr walbro 80series etc. it was rolling road ed are 417 bhp . with loads of torque at 1.85 if set to 1.85 and it's boosting to that but has lost all its torque. anyone on hear have the same set up with a avcr can you give me your settings please

 

[GKITCH]

you could put it in learn mode in every gear im mapped to 401 at 1.5 and on that one it runs
best learning in every gear but that's on my car I took photos of mine after mapping .
Hope you get it sorted

 

[gary stanfield]

you could put it in learn mode in every gear im mapped to 401 at 1.5 and on that one it runs
best learning in every gear but that's on my car I took photos of mine after mapping .
Hope you get it sorted

Ok ill give it a go thanks

 

[GKITCH]

Ok ill give it a go thanks

If you need to see the cycles and that I don't mind
but my car is different to yours

 

[gary stanfield]

If you need to see the cycles and that I don't mind
but my car is different to yours

That would be great if you could . what moss are you running

 

[GKITCH]

That would be great if you could . what moss are you running

soz mate ive had some battery/earth problems and have not been able to sort yet hopefully every thing will be workings tomoz an ill sort out
if still needed soz again

 

[gary stanfield]

soz mate ive had some battery/earth problems and have not been able to sort yet hopefully every thing will be workings tomoz an ill sort out
if still needed soz again

it's ok no matey all sorted thanks again