Evo_Steve
New Member
- Messages
- 14
Hi guys just thought I'd register as I picked up my evo yesterday. It's an Evo 5 2.3 stroker fully forged. The spec
Engine
4g64 crank
H beam rods
Wiseco 2.3 piston
ACL race bearings big ends and mains
New oe oil pump
New oe water pump
1.3 cometic steel head gasket
Evo 8 mr cams
Hks cam pulleys
Balancer delet kit
New cambelt and tensioners
Big alloy rad 52mm
Evo 8 boost pipe kit
New alternator
Apexi power fc
Hdi boost controller
Light weight flywheel with paddle clutch .
13 row oil cooler upgrade and lines
Custom made twin back box exhaust
Uprated fuel pump
Oil catch tank
Hks induction
Uprated turbo bearings and flinger
Inside
Hdi boost controller
Depo boost gauge
Egt gauge
Depo 4in1 oilpress, temp , water temp and volts
Intake temp gauge
Inovate wide band
Smoked back windows
Rallyart mat set+ boot mat.
High/low hid kit
Front bumper canards
Bola 18" wheels with new tyres
Uprated big front disc and pads.
Car has only covered 400 miles since remap by mgt racing ltd at 398bhp and 417ft lbs at 1.4 bar of boost.
To get more out of it turbo and injectors would be needed then 600bhp would be easy to obtain









Engine
4g64 crank
H beam rods
Wiseco 2.3 piston
ACL race bearings big ends and mains
New oe oil pump
New oe water pump
1.3 cometic steel head gasket
Evo 8 mr cams
Hks cam pulleys
Balancer delet kit
New cambelt and tensioners
Big alloy rad 52mm
Evo 8 boost pipe kit
New alternator
Apexi power fc
Hdi boost controller
Light weight flywheel with paddle clutch .
13 row oil cooler upgrade and lines
Custom made twin back box exhaust
Uprated fuel pump
Oil catch tank
Hks induction
Uprated turbo bearings and flinger
Inside
Hdi boost controller
Depo boost gauge
Egt gauge
Depo 4in1 oilpress, temp , water temp and volts
Intake temp gauge
Inovate wide band
Smoked back windows
Rallyart mat set+ boot mat.
High/low hid kit
Front bumper canards
Bola 18" wheels with new tyres
Uprated big front disc and pads.
Car has only covered 400 miles since remap by mgt racing ltd at 398bhp and 417ft lbs at 1.4 bar of boost.
To get more out of it turbo and injectors would be needed then 600bhp would be easy to obtain








