And so it begins

[Wingnut247]

More progress pics

 

[B6lee]

You finished early then.

 

[Wingnut247]

Few more bits ready to refit!

 

[Nickygixer-k5]

Don't know how to tell you this Chris but it looks like some sort of radioactive substance is gathering under your anti rollbar

 

[Wingnut247]

More refitting today! Can see the light at the end of the tunnel now!

 

[Wingnut247]

 

[Wingnut247]

Bit of an update! Car all back together and test driven!
Unfortunately the usual evo gremlins struck as per sods law, first up the abs light stayed on! Traced to a failed plug on nsr speed sensor, removed plug and hard wired. Problem solved!
Next up after bleeding ayc pump with plenty of new fluid, 2 mile test drive light comes on! Read code, dreaded 82 (pump fail) grrrrrrrrrr!

So just order a nice new rebuild kit and bleedbox off of dan oldham! (cheers Dan)

So will post up some rebuild pics of ayc pump once kit arrives!

 

[Nickygixer-k5]

Your not having much luck hey, I would keep it off the road for good and just preserve it:whistling:

 

[Wingnut247]

Your not having much luck hey, I would keep it off the road for good and just preserve it:whistling:

Lol! No its just testing my comittment i reckon! Going to give it some abuse as punisment once i fixed it!
Yours finished yet? Liking all these polished bits your having!

 

[Nickygixer-k5]

Lol! No its just testing my comittment i reckon! Going to give it some abuse as punisment once i fixed it!
Yours finished yet? Liking all these polished bits your having!

erm nope, it's like waiting for christmas, in fact I would think christmas 2014 would be sooner:meh:

 

[Wingnut247]

Rear wheel alignment today!

Couple of pics of the finished product underneath while on the ramp!

And sum on first trip out!

 

[Billy MR]

Them wheels and that stance makes me want one

 

[Wingnut247]

Them wheels and that stance makes me want one

Cheers mate!

 

[Nickygixer-k5]

If you didn't take it all apart you wouldn't have had to have it realigned; )

 

[Wingnut247]

AYC pump overhauled this evening and all back up and working again!

Got a very good quality and comprehensive rebuild kit and a bleed control box thx to Dan oldham (svengali)
member on here! Will add link to him at bottom for anyone looking to do a rebuild!
Highly recommended! Bleed control box makes bleeding an absolute doddle!

Link to AYC repair kit
http://www.evoowners.co.uk/showthread.php?p=141850#post141850

 

[B6lee]

Good kit indeed !!

You happy now mate

 

[Wingnut247]

Good kit indeed !!

You happy now mate

Yeap! Excellent reasult!

 

[Wingnut247]

First 3k done on the forged motor this week so decided it was time for service interval!
Also had weeping oil cooler pipe so had local hydraulics place remanufacture the oil cooler hoses for me!

 

[Wingnut247]

Decided a while ago i wanted some carbon rapping done on the car, finally got round to having it done yesterday!
Be thanks to lee for doing a top job and putting up with me hanging about and generally getting in his way! Lol! Heres some pics of work in progress !

Heres the bit I did myself as was flat and dead easy!

Took car up workshop for a good wash and took some pics of finished reasults of rapping with a clean car!

Got a Blitz Nur Spec R 3" cat back last week too

Thx to B6lee for the cusco 3 point strut brace and carbon fibre effect bonnet dampers too!

Oh and also thx to lee for window vents! Lol

 

[B6lee]

No problem mate, looks good now :razz: this wrapping is easy :razz: